2-component compound for quick and simple repairs of surface damage Easy to use No laborious mixing process required Good dispensing option Quick to apply Excellent adhesive properties High strength Broad range of applications Simple to process further Suitable for a wide range of post-processing options, such as drilling, milling, sawing and sanding Can be painted over High temperature resistance up to 120C, briefly up to 150C Notice Protect from frost and direct sunlight when not applied. Gloves should be worn when applying the repair compound. Due to the different material densities, there are differences in the information regarding the weight of each stick type. For applications subject to high material stresses, the suitability of the repair compound must be checked with preliminary testing. The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products. Chemical basis Epoxy resin Colour Silver coloured Density 2.5 g/cm Length 175 mm Diameter (O) 22 mm Min./max. processing time 2-5 min Can be further processed after min. 20 min Further processing conditions at 20C Min. final strength 3 h Conditions for final strength at 23C Min./max. processing temperature 5 to 25 C Min./max. temperature resistance of the hardened material -20 to 120 C Max. short-term temperature resistance 150 C Substrates with good adhesion Copper Brass Aluminium Lead Chrome Stainless steel Cast iron Steel (bare and anodised) Titanium Zinc sheets Shore D hardness 85 Min. tensile strength 6.4 N/mm Shelf life from production/conditions 24 Month / frost-free storage area, no exposure to sunlight