UniFi AP In-Wall Wi-Fi Access Point (UAP-IW) Description: The UAP-IW is ideal for retrofitting an existing in-wall wired Ethernet jack to a wireless access point. It also provides one RJ45 data port and one PoE port to connect devices like a VoIP phone. The UAP-IW is capable of speeds of up to 150 Mbps with a range of up to 25 m (82 ft). Specifications (UAP-IW) UniFi AP In-Wall Networking Interface: (3) 10/100 Ethernet Ports Buttons: Reset Operating Band: 2.4 GHz Antenna Gain: 1 dBi Wi-Fi Standards: 802.11 b/g/n Power Method: UniFi Switch PoE Out: 48V Pass-Through (Pins 1, 2+; 3, 6-) Maximum Power Consumption: 6W Maximum TX Power: 17 dBm BSSID: Up to Four Per Radio Power Save: Supported Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) Certifications: CE, FCC, IC Mounting 1-Gang Electrical Wall Box (Not Included) Operating Temperature: -10 to 70 C (14 to 158 F) Operating Humidity: 5 to 95% Noncondensing Dimensions: 114.6 x 70.6 x 28.5 mm (4.51 x 2.78 x 1.12 in) Weight: 117 g (4.127 oz) Advanced Traffic Management VLAN: 802.1Q Advanced QoS: Per-User Rate Limiting Guest Traffic Isolation: Supported WMM: Voice, Video, Best Effort, and Background Concurrent Clients: 100+ Supported Data Rates (Mbps) Standard: Data Rates 802.11n: 6.5 Mbps to 150 Mbps (MCS0 - MCS7, HT 20/40) 802.11b: 1, 2, 5.5, 11 Mbps 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbp Extra Information Brand: Ubiquiti Warranty Information One Year Limited Warranty with Ubiquit