Brand NEW! Offering a supremely small and budget-friendly solution for getting audio from vinyl records or line-level sources into your computer, headphones, and speakers, the Behringer UFO202 packs a surprising set of I/O and features into an ultracompact, bus-powered 2x2 USB audio 1.1 interface that fits in your pocket and needs no drivers and no special configuration. Its unbalanced stereo analog input (on RCA jacks) features a line/phono switch, allowing it to accept line-level signal from sources such as a DJ mixer, cassette deck, or mixing console, or (in phono mode) the outputs of a turntable. The built-in phono preamp ensures proper amplification of the low-level outputs from record players without requiring a separate device. The UFO202 has more outputs than you would expect on a such a miniscule box?a stereo RCA output for running a feed to a speaker system and a 3.5mm headphone output with a volume control for convenient personal monitoring of the input signal. With internal 16-bit / 48 kHz AD/DA converters and a USB Type-A connector on an attached cable, the UFO202 plugs directly into your Mac/Windows computer for quality recording or streaming. It comes with a bundle of audio recording/editing/restoration software, effects plug-ins, and virtual instruments, so you can have fun and be productive without having to buy a slew of programs. Transfer Records and Tapes Connect outputs from a turntable, cassette player, DJ mixer, or mixing console to your computer for simple, cost-effective digitization of your precious records or mixes. Stereo Line/Phono Inputs Thanks to the line/phono switch and the presence of a built-in phono preamp, the RCA input jacks on the UFO202 are ideal for accepting the outputs of a record player or for receiving unbalanced line-level signal from analog mixers, DJ decks, and more. Ground Terminal Some record players have a separate ground cable. If so, attach the cable to the UFO202's ground terminal to avoid excessive noise and hum. Multiple Outputs With a stereo RCA output and a level-adjustable 3.5mm stereo headphone output, the UFO202 can simultaneously accommodate headphones and a speaker system while the USB connection carries digital audio to and from your computer. Simple Operation Since the UFO202 is bus powered via USB, it requires no batteries or external power supply. Also, it works without having to download and install drivers, so you can just plug it in and start using it. Includes Software To enhance your audio experience, the UFO202 comes with audio recording/editing/restoration software, effects plug-ins, and virtual instruments. Record live audio, convert tapes and records into digital recordings, edit sound files, apply noise-reduction, mix sounds together, change the speed or pitch of a recording, and much more. Specs Form Factor Tabletop Display None Channels of I/O 2 Inputs / 2 Outputs at 48 kHz Max Sample Rate/Resolution 48 kHz / 16-Bit Number of Mic Preamps None Solo/Mute None Pad None High-Pass Filter None Expansion Slots None Connectivity Analog Audio I/O 1 x Stereo RCA Coaxial Unbalanced Line/Phono Input 1 x Stereo RCA Coaxial Unbalanced Line Output 1 x 1/8" / 3.5 mm TRS Unbalanced Headphone Output Phantom Power None Digital Audio I/O None Host Connection / USB 1 x USB Type-A (Class-Compliant USB 1.1) USB (Non-Host) None Sync I/O None Network I/O None MIDI I/O None Wireless Connectivity None Memory Card Slot None Performance Frequency Response System: 10 Hz to 20 kHz 1 dB (at 44.1 kHz) 10 Hz to 22 kHz 1 dB (at 48 kHz) Max Input Level 2 dBV Max Output Level Line Outputs: 2 dBV Headphone Outputs: -2 dBu Headphone Output Power 3.7 mW per Channel into 100 Ohms Impedance Line Inputs: 27 Kilohms Line Outputs: 400 Ohms Headphone Outputs: 50 Ohms SNR A/D Converters: 89 dB (A-Weighted, 1 kHz) D/A Converters: 96 dB (A-Weighted, 1 kHz) THD 0.05% (1 kHz) Crosstalk -77 dB (1 kHz) Digital Audio Sample Rates 32 / 44.1 / 48 kHz Sample Rate Conversion None Bit Depths 16-Bit Sync Sources Internal Compatibility OS Compatibility macOS 9.0.4 or Later macOS 10 or Later Windows 2000 Windows XP Included Software None Supported Drivers/API Plug-Ins macOS Class-Compliant (No Driver Needed) Windows Class-Compliant (No Driver Needed) Processor Requirement Mac: 300 MHz PowerPC G3 PC: 400 MHz Intel RAM Requirements 128 MB Mobile Device Compatibility None Required Hardware Available USB 1.1 Port Internet Connection Required for Registration, Software/Driver Download Power Power Requirements USB Bus Power Current Consumption 100 mA Physical Dimensions 3.46 x 2.36 x 0.87" / 8.79 x 5.99 x 2.21 cm Weight 3.5 oz / 100.0 g Packaging Info Package Weight 0.53 lb Box Dimensions (LxWxH) 7.35 x 5.6 x 1.45" - All international buyers are responsible for all tax, duties and/or customs fees.