51300C Replacement Filter for EZH2O Bottle and similar items

Specifications: Micron Rating: 0.5 Microns Flow Rate: 1.5 GPM / 5.68 LMP Capacity: 3000 Gallons Max Temp: for cold water use only: 100 F (38 C) Max Pressure: 125 PSI Details: 51300C Comparable Filters by Aqualutio brand. Disclaimer: Do not use this filter with water that is Hot. Do not use the filter with water that is microbiologically unsafe or of unknown quantity. DO NOT use this filter longer than its intended 12 Month use. Doing so may result in leaks and water damage. Elkay and WaterSentry Plus, and Halsey Taylor are registered trademarks of Elkay Manufacturing Company, Oak Brook, IL. Elkay and WaterSentry Plus, and Halsey Taylor are registered trademarks of their respective holders. Aqualutio Company and are not affiliated with Elkay and WaterSentry Plus, and Halsey Taylor. Use on cold water line only. Do not allow installed filter to freeze. Do not attach hot water line to filter. • Filter should be replaced every 3000 gallons (11,356 liters), or approximately 1 year after installation. Install Instructions: 1. Turn off Water Supply 2. Remove existing filter. 3. Install new filter in head and turn till locked. 4. Turn on Water Supply. 5. Check for leaks. 6. Flush system for 3-5 Minutes. INSTALLATION INSTRUCTIONS The filter must be installed in compliance with all state and local laws and regulations governing the installation and use of this product. Disconnect electrical power and close water supply valve before proceeding. The filter must be installed in the cold water line. Flow indicator (arrow) on filter should point in the same direction as the water flow. After installing new filter, open water supply valve and check for leaks. Reconnect electrical power supply. Flush system sufficiently (approximately 3 minutes) to effectively remove small residue of carbon fines. NOTE: A water shutoff valve should be installed Elkay Ezh2o Bottle Filling Station Filtration Features Filter Replacement Depending on usage, replace filter every 3,000 gallons, or one year after installation. Vandal-resistant Retrofit Filtration Kits Add filtration to existing non-filtered coolers, fountains and bottle filling stations. Includes: WaterSentry VII filter, vandal-resistant enclosure and filter status monitor. Individual and Multipack Replacement Filters Available With options for every budget, select replacement filters are available individually, or, in cost-saving three-packs or 12-packs. Elkay Ezh2o Bottle Filling Station Filtration Benefits Tool-free Filter Replacement Quick-Disconnect design for easy filter replacement with a simple 1/4 turn of the filter. Compatible Filters Replacement 51300-C filters are designed to work with Elkay ezH2O bottle filling stations. Clog-preventing Filter Prefilter mesh prevents large, coarse sediment and particles from entering and clogging the filter media. Help Reduce Contaminants Designed to reduce lead, particles and chlorine. Also reduces odors and discoloration from incoming water.