APC - SMC1500C - Smart-UPS C Battery Backup and 28 similar items

Brand NEW! Designed for servers, point-of-sale, routers, switches, hubs, and other network devices, the Smart-UPS C Battery Backup Surge Protector with SmartConnect from APC has a tower form factor and delivers intelligent and efficient network power protection from entry level to scalable runtime. It can provide 146 minutes of use at 50W, 90 minutes of use at 100W, 49.2 minutes of use at 200W, 32.5 minutes of use at 300W, 23.5 minutes of use at 400W, 18 minutes of use at 500W, 14.2 minutes of use at 600W, 11.5 minutes of use at 700W, 9.4 minutes of use at 800W, and 7.8 minutes of use at 900W. This Smart-UPS C features an output of 900W / 1440 VA, an input of 120V @ 50/60 Hz 3 Hz, eight NEMA 5-15R battery backup outlets, a NEMA 5-15P input connection, a surge energy rating of 680 joules, line interactive topology, and a sine waveform. Included PowerChute Network Shutdown management software helps to provide unattended, yet proper shutdowns of network operating systems, and also included is a USB cable. Support is provided by a limited 2-year repair or replace warranty and a limited lifetime $150,000 equipment protection policy. APC SmartConnect makes the Smart-UPS more adaptable and easier to deploy, enabling you to view the status of your UPS through a secure web portal. Through this remote management interface, you'll receive automatic notifications, firmware updates, and advanced support. SMC1500C Features Cold-Start Capable Provides temporary battery power when the utility power is out. Green Mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. High Online Efficiency Reduces utility costs, generates less heat. LCD Status Display Provides key UPS status at a glance. There are multiple status indicators with load and battery bar graphs. Pure Sine Wave Output Simulates utility power to provide a high degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics. Smart-UPS Features Benefits Adaptability Adjustable Voltage-Transfer Points Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation. Adjustable Voltage Sensitivity Provides the ability to adapt the UPS for improved performance in specific power environments or generator applications. Safety Safety-Agency Approved Helps ensure the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. Manageability Serial Connectivity Provides management of the UPS via a serial port. USB Connectivity Provides management of the UPS via a USB port. Disconnected Battery Notification Warns when a battery is not available to provide backup power. Network Manageable Provides remote power management of the UPS over the network. Audible Alarms Actively lets you know if the unit is on battery, if the battery is low, or if there is an overload condition. LED Status Indicators Quickly understand the unit and power status with visual indicators. Serviceability Battery Failure Notification Provides early-warning fault analysis on batteries, thus enabling timely preventive maintenance. User-Replaceable Batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries, thus reducing the Mean Time to Repair (MTTR). Hot-Swappable Batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced. Predictive Failure Notification Provides early-warning fault analysis, helping to ensure proactive component replacement. Resettable Circuit Breakers Enables a quick recovery from overload events. Availability Intelligent Battery Management Maximizes battery performance, life, and reliability through intelligent, precision charging. Power Conditioning Protects connected loads from surges, spikes, lightning, and other power disturbances. Boost and Trim Automatic Voltage Regulation (AVR) Gives higher application availability by correcting low and high voltage conditions without using the battery. Automatic Self-Test A periodic battery self-test ensures early detection of a battery that needs to be replaced. Automatic Restart of Loads After UPS Shutdown General Total Outlets 8 x NEMA 5-15R Protected Outlets 8 x NEMA 5-15R (Battery and Surge) Plug Type NEMA 5-15P USB Charging Ports None SmartSlot Interface None Coax Protection None Data Line Protection RJ45 Communications USB, Serial Emergency Power Off (EPO) Support No Noise Filtering 0.3% Topology Line Interactive Transfer Time 6 to 10 ms Power Surge Energy Rating 680 Joules Maximum Wattage 900 W Nominal Input Voltage 120 VAC Input Voltage Range 93 to 130 VAC Input Voltage Adjustable Range 85 to 136 VAC Input Frequency 50/60 Hz 3 Hz (Auto Sensing) Nominal Output Voltage 120 VAC Output Voltage Range 110 to 127 VAC Output Frequency /60 Hz 3 Hz Voltage Distortion 5% Load Capacity 1440 VA Thermal Dissipation 225 BTU/Hour Waveform Sine Wave Battery Chemistry Lead-Acid Full-Load Runtime 7.8 Minutes Half-Load Runtime 20.4 Minutes Charging Time 3 Hours User Replaceable Yes Replacement Battery RBC6 Hot-Swap Support Yes External Battery Connection None Environmental Operating Temperature 32 to 104F / 0 to 40C Operating Humidity 0 to 95% Storage Temperature 5 to 113F / -15 to 45C Storage Humidity 0 to 95% Operating Altitude 0 to 10,000' / 0.00 to 3048 m Storage Altitude 0 to 50,000' / 0.00 to 15,240 m Noise Level 45 dBA Physical Cable Length 6' / 1.83 m Dimensions (W x H x D) 6.73 x 8.62 x 17.28" / 170.94 x 218.95 x 438.91 mm Weight 44.3 lb / 20.1 kg Packaging Info Package Weight 48.9 lb Box Dimensions (LxWxH) 23 x 13 x 12.5" - All international buyers are responsible for all tax, duties and/or customs fees.