Tyan S2518GNR Thunder Le-T Dual socket 370 and 50 similar items

TyanThunder Le-T (S2518GNR) Motherboard Dual Socket 370 motherboard Storage: Dual-channel master mode Up to four Enhanced IDE devices Support for ATA-100/66/33 IDE and ATAPI-compliant devices Rear Panel I/O Ports: One serial port and one VGA port Stacked USB (two) ports Stacked keyboard and mouse ports Side-by-side LAN (two) ports Internal I/O Interface: One floppy connector supports up to two drives: microfloppy support via optional cable Two USB (Via Cable) one 25-pin SPP/ECP/EPP parallel port via optional cable One 9-pin 16550-based serial ports Integrated IDE RAID: Promise FastTrak100 IDE RAID controller Dual-channel master mode Support up to four Enhanced IDE devices Support for UDMA 100/66/33 IDE drives Supports IDE RAID levels 0, 1 and 0 1 Hardware Monitoring: Winbond W83782D hardware monitoring ASIC 2-pin chassis intrusion header CPU temperature and voltage monitoring Integrated Video: ATI RAGE XL graphics controller 4MB frame buffer (SDRAM) Standard 15-pin analog VGA port Motherboard Specifications Model: Thunder LE-T (S2518GNR) Motherboard Processor Support: Dual PGA370ZIF sockets Supports up to 2 Intel Prntium III processors (FC-PGA) Two onboard VRMs (VRM 8.4 spec) Chipset: ServerWorks ServerSet III LE3 chipset Integrated I/O APIC OSB4 south bridge SMsC FDC37B787 Super I/O ASIC FSB: 100MHz and 133MHz Memory: Four 25 angled 3.3v 168-pin DIMM sockets Angled sockets enable rackmount installation Up to 4GB PC133 Registered SDRAM Support for ECC (72-bit) memory modules Expansion Slots: One 64-bit 66MHz (3.3-volt) PCI slot and one 64-bit 66MHz (5-volt) PCI slot. 3.3-volt slot supports Adaptec 2000S Zero-channel RAID controller Total of two usable slots (one if installed in 1U) PCI riser card required when installed in 1U/2U Regulatory: FCC DoC (Declaration of Conformity) European CE (Declaration of Conformity) Integrated LAN Controllers: Dual LAN controllers (Intel 82559) 10/100Mbps data transfer rate per controller BIOS: AMI BIOS on 4Mb Flash ROM User settings for hardware monitoring Auto configuration of IDE hard disk types DMI 2.0 compliant Multiple boot options Form Factor: ATX footprint (12" x 9.6", 304.8mm x 243.84mm) One 20-pin ATX power connector