6 Pcs Max4466 Electret Microphone Amplifier and similar items

Contact Us Add to Favorite Welcome to Elegant Wings Contact Us Add to Favorite Fast Shipping Hassle Free Return Money Back Guarantee Authenticity Guarantee 6 Pcs Max4466 Electret Microphone Amplifier Module Blue Board Breakout Item Description Using introduction: Connect GND to ground, VCC to 2.4-5VDC. The audio waveform will come out of the OUT pin. The output will have a DC bias of VCC/2 so when its perfectly quiet, the voltage will be a steady VCC/2 volts (it is DC coupled). If the audio equipment you're using requires AC coupled audio, place a 100uF capacitor between the output pin and the input of your device. If you're connecting to an audio amplifier that has differential inputs or includes decoupling capacitors, the 100uF cap is not required. The output pin is not designed to drive speakers or anything but the smallest in-ear headphones- you'll need an audio amplifier (such as 3.7W stereo amp) If you want to connect the amp directly to speakers. If you're connecting to a microcontroller pin, you don't need an amplifier or decoupling capacitor - connect the OUT pin directly to the microcontroller ADC pin. For audio-reactive projects, we suggest using an FFT driver library which can take the audio input and 'translate' it into frequencies. Package Included: 2* MAX4466 Electret Microphone Amplifier Module Application scenarios: cellular phones, repeating sound device, earphones, hearing aids, microphone preamplifiers, portable computers, voice recognition systems, etc. This fully assembled and tested board comes with a 20-20KHz electret microphone soldered on. Easy to use:The board comes with a 20-20KHz electret microphone soldered on Using the MAX4466, an op-amp specifically designed for amplifier; for the best performance, use the "quietest" supply available (on an for Arduino, this would be the 3.3V supply);the amplifier has excellent power supply noise rejection Parameters: power supply voltage: +2.4V to +5.5V (can be compatible with STM, Raspberry Pi and other development board motherboards); Power supply rejection ratio: 112dB; Common mode rejection ratio: 126dB; AVOL: 125dB (RL = 100k?) rail-to-rail output; Quiescent power supply current: 24?A; Gain bandwidth: 600kHz Size:20.8MM*13.8MM*7.5MM This breakout board is best used for projects such as voice changers, audio recordingmpling, and audio-reactive or DIY projects that use FFT About us Customer service is our top priority! Please be sure to read the description thoroughly to make sure that this is the item you want before making a purchasing decision. If you have any questions about this item, please contact us via messages before placing your order. We make every effort possible to accurately describe and depict the items. Please be aware that slight variations in color may be due to differences in lighting and computer monitor resolutions. All items are in stock at the time of listing however, in the unlikely and unforeseen event that we are unable to fulfill your order through any of our networked warehouses, we will notify you as quickly as possible and offer you a 100% refund on your purchase. Thank you for shopping with us. We appreciate your business! B09MRTRR56 Payment PayPal is our preferred method of payment. If you do not have a PayPal account, all major credit cards are gladly accepted through PayPal as the payment processor. PayPal offers great buyer and seller protection. Your order will be processed pending receipt of cleared payment through PayPal. Sales tax may be charged depending on your location. Shipping We provide fast, free shipping. Most items are shipped within 3-5 business days of receiving cleared payment. We ship to the lower 48 contiguous United States only. We do not ship to P.O. Boxes or APOs. Standard Shipping is ALWAYS FREE! You will be notified via messages as soon as your items ship. Special Notice for Freight Items: If an item ships via Freight (Truck) Delivery, a valid phone number will be required so that we can contact you to schedule delivery. The item may be delivered with curbside delivery. An adult signature will be required. Please be sure to have available help on hand to assist you with moving the item to the desired location in or outside of your home. Freight items must be inspected upon delivery. In the unlikely event that damaged is observed, you MUST refuse delivery and note the damage on the shipping receipt and send it back via the Freight carrier. Returns will not be accepted on Freight items after they have been delivered, inspected, and the driver has left the premises. Returns We offer a 30 day return/exchange policy for most of our products. You can request a refund if you are dissatisfied for any reason with your product. (Restocking Fee May Apply). Only factory defects are accepted as a reason for a return. In the case of factory defects, if available, we will replace the product for you. When returning an item, it must be in all of the original packaging and include all of the original accessories or items that came with it. The item and package should be in original and perfect condition. You will be required to cover shipping on the return of non-defective items. All returns MUST be done within 30 days of date of purchase. Please note that we cannot give refunds or replacements after the 30 day limit has expired. When sending in a return, please note that it can take up to 7 business days for the return to be processed. We do our best to process as quickly as possible. We are extremely fair, and in the rare event of something out of the ordinary happening with our products or shipping, we will gladly work with you to find a fair resolution.