Dayton Audio - DS115-8 - 4" Designer Series and 50 similar items

Brand NEW! Including 90 Days USA Factory Warranty. More than just a pretty speaker, the Dayton Audio Designer Series DS115-8 4" woofer features an extremely neutral response and high Xmax capability. Key Features Coated paper cone, half roll rubber surround for durability and accurate reproduction Cosmetic frame with low profile lip, designed for front mounting?no countersinking required! Optimized to yield a low 3 dB down point and high potential output in a reasonably sized cabinet Vented pole piece for minimized power compression and maximized reliability Generous Xmax capability encourages use of moderate bass boost to tailor the response Smooth frequency response and linear roll-off simplify filter design, assuring good results with off-the-shelf crossovers Retains the same "family look" as the popular Dayton Audio DVC Series subwoofers and passive radiators The Designer Series by Dayton Audio was developed specifically with the speaker designer in mind. It is an affordable, attractive line of drivers that puts performance first. Careful engineering ensures that each speaker in the series is capable of handling full rated power at the lowest possible frequencies?without exceeding Xmax. These speakers combine useful performance parameters with elegant style. Carefully optimized to provide superb audio reproduction when incorporated into a wide variety of enclosures and alignments, the Designer Series transducers put a beautiful face on audiophile excellence. ? Suggested enclosures: Sealed cabinet: Type: Closed (alpha 1.9), Qtc 0.55; Size (internal) including volume displaced by driver: 0.1 ft; Internal cabinet dimensions (golden ratio): 9"H x 5-1/2"W x 3-1/2"D. Typical results: 3 dB down-point (f3): 135 Hz; Low frequency limit at rated power without exceeding conventional Xmax (i.e. (voice coil length ? gap height) / 2)): 70 Hz. Vented cabinet: Type: Bass reflex; Size (internal) including volume displaced by driver and port: 0.12 ft; Internal cabinet dimensions (golden ratio): 9-1/2"H x 5-7/8"W x 3-5/8"D; Port dimensions (with flared exit): 1" dia. x 6"L. Typical results: 3 dB down-point (f3): 73 Hz; Tuning frequency (fb): 69 Hz; Low frequency limit at rated power without exceeding conventional Xmax (i.e. (voice coil length ? gap height) / 2)): 55 Hz. Frequency response (FRD) and Impedance (ZMA) data files available to assist in crossover and enclosure modeling. Product Specifications Nominal Diameter 4" Bolt Circle Diameter 4.21 Moving Mass Of Diaphragm (Mmd) 7.9 Power Handling (RMS) 35 Watts Power Handling (MAX) 70 Watts Impedance 8? Frequency Response 60 to 8,000Hz Sensitivity 85.3dB 2.83V/1m Voice Coil Diameter 1" Thiele-Small Parameters Resonant Frequency (Fs) 55.2Hz DC Resistance (Re) 5.8? Voice Coil Inductance (Le) 0.8mH Mechanical Q (Qms) 2.1 Electromagnetic Q (Qes) 0.46 Total Q (Qts) 0.38 Compliance Equivalent Volume (Vas) 0.15ft Mechanical Compliance of Suspension (Cms) 1.05mm/N BL Product (BL) 5.88T·m Maximum Linear Excursion (Xmax) 4.1mm Surface Area of Cone (Sd) 54.1cm Materials of Construction Cone Material Coated Paper Surround Material Rubber Voice Coil Wire Material Copper Voice Coil Former Aluminum Basket / Frame Material Steel Magnet Material Ferrite Mounting Information Overall Outside Diameter 4.55" Baffle Cutout Diameter 3.69" Depth 2.15" # Mounting Holes 4 Optimum Cabinet Size (determined using BassBox 6 Pro High Fidelity suggestion) Sealed Volume 0.04ft Sealed F3 124Hz Vented Volume 0.09ft Vented F3 70Hz - All international buyers are responsible for all tax, duties and/or customs fees.