Removable screw retainer and sealing compound ? one-handed dispensing system Removable screw retainer and sealing compound ? one-handed dispensing system Medium-strength bonding Can be removed using normal tools Can also be applied to stainless steel and passivated surfaces No "accelerator" or "activator" required Excellent media and thermal stability Universal products with a wide range of application Prevents detachment, e.g. through vibration and shock loads No unwanted locking problems such as with mechanical screw retainers, for example High resistance Resistant to a large number of bases, gases, solvents, oils and fuels (see resistance list) Silicone-free, solvent-free and oil-free DOS system: Practical one-handed operation thanks to the clever turn lock One hand always remains free. Continuously adjustable dispensing system Dispensing can be adjusted to suit the application, and to keep consumption and costs to a minimum. No residue material in dispensing neck Costs optimised thanks to emptying with virtually no remaining product Proof of Performance NSF-tested in accordance with NSF/ANSI 61 for use in service water and drinking water DVGW approval, tested in accordance with DIN EN 751-1 (not permissible in domestic gas installations in Germany in accordance with DVGW TRGI 2018.) Conforms to the formula recommended by the German Environmental Protection Agency for use in applications which come into contact with drinking water dated 11 February 2016. If being used as a thread sealant which comes into contact with drinking water, please observe the relevant recommendations from the association of the adhesive and sealant industry. Notice The following plastics can be affected in the event of prolonged exposure: ABS, celluloid, polystyrene, polycarbonate (Macrolon), PMMA (Plexiglas), polysulfone, SAN (lurane, Tyril), Vinidur, vulcanised fibre, and painted surfaces. Chemical basis Dimethacrylic acid ester Colour Blue fluorescent Density/conditions 1.12 g/cm / in accordance with DIN EN ISO 2811-1 Min./max. viscosity 1 /conditions 1 4000-9000 mPas / at 25C, Brookfield RVT, spindle 3/2.5 rpm Min./max. viscosity 2 /conditions 2 1500-3000 mPas / at 25C, Brookfield RVT, spindle 3/20 rpm Suitable for max. thread M36 Max. gap-filling ability 0.25 mm Min./max. initial strength 5-15 min Min./max. functional strength 0.5-1 h Min./max. final strength 1 h-3 h Min./max. compressive shearing strength /conditions 10-20 N/mm / in accordance with ISO 10123 Min./max. breakaway torque 15-25 Nm Breakaway torque conditions DIN EN 15865 Min./max prevail torque 3-8 Nm Conditions for prevail torque DIN EN 15865 Min./max. processing temperature 5 to 35 C Min./max. temperature resistance -55 to 150 C Min. flashing point 100 C Shelf life from production/conditions 18 Month / at room temperature Weight of content 25 g Silicone-free Yes Solvent-free Yes Fully hardening/curing conditions Exclusion of oxygen and contact with metal (copper or iron ions)