Traction Control Bar Kit For Honda Civic CRX and 15 similar items

* Aluminum T-304 light weight stainless steel. * The diameter of this bar is approx. 38mm, it's STRONG, and was a breeze to install. * Unlike the old design and most other traction bars on the market, it comes with its own 1 piece Radius rods and 1 adjustable heims, and able to adjust caster where it bolts up to the lca. * Increase traction to ground. * Prevent spring windup during breaking. * Easy to fit, direct bolt on. * Professional Installation is Highly Recommended * Installation Instruction is not Included. Installation steps: 1. Remove the old crossmember 2. Remove both front tow hooks. 3. Mount the Traction bar without the radius arms. 4. Install radius arms. Bolt the front first where it goes on the bar 5. loosen up the nut on the heims and adjust length until the holes line up to the top of the front lower control arm(be sure to count the threads on the heims to make sure both side is equal length) 6. Tighten up all bolts and make sure to not forget the nut on the heims. Fitment: * For Honda Civic 1988-1991 models only * For Honda CRX 1988-1991 models only * All CAN and US models (Also all non-VTEC European and JDM chassis) PACKAGE INCLUDES 1 * Traction Control Tie Bar Kit