This Listing is for One (1) Dell 4 Bay 1U PowerEdge R310 1x Quad-Core X3470 2.93Ghz 16GB 2 Drive Fillers No HDD/SSD or Caddies, NO OS/Software

Will come with: INFO is from Dell Support Tag # on Dell Support Site (verify with sudo inxi report at end of listing)
Dell Service Tag # 6VK4HQ1
(2) 430-2008 : On Board network Adapter KX955 INFORMATION, SERVER, SERVER CHASSIS 
(1) 342-0767 : SAS 6iR SAS internal RAID adapter, PCI-Express HM030 PRINTED WIRING ASSY, CONTROLLER, SAS6/IR, MODULAR
(2) 330-8209 : Power Supply, Redundant, 400W M536K PRINTED WIRING ASSY, POWER DISTRIBUTION BOARD, SERVER, SERVER CHASSIS, R310
  T130K POWER SUPPLY, 400W, REDUNDANT, RACK, DELTA PRODUCTS
(1) 330-8175 : RAID 1 - Add-in SAS6iR/H200/ H700 (SAS/SATA Cntrlr), 2 Hot Plug HDD X0C54 INFORMATION, CONFIG18, ASSR1, PER310
(4) 317-5137 : 16GB Memory (4x4GB), 1333MHz, Dual Ranked RDIMM 7H18C DUAL IN-LINE MEMORY MODULE, 4G, 1333, 2RX8X72, REGULATORY, C1KCN
(1) 317-2308 : X3470 Xeon Processor 2.93 GHz, 8M Cache, Turbo, HT VMM76 PROCESSOR, X3470, 2.93/4.8, 8MB, XUL, B1
(1) 313-9126 : DVD ROM, SATA, INTERNAL 7RDMR ASSEMBLY, DIGITAL VIDEO DISK DRIVE, Serial ATA, 12.7, TEAC, ENTERPRISE SYSTEMS GROUP
(1) 313-7839 : Bezel D807J ASSEMBLY, BEZEL, 1U, POWEREDGE, R410 (NO KEY)


It has been tested to run and function well using multiple OS's (Linux Mint  Windows Server 2012v2 Hiren's Boot CD )

It was pulled on upgrades from a clean secure facility taken care of


Linux Mint sudo inxi -F -m -n -s
-F, --full           Full output. Includes all Upper Case line letters except -W, plus -s and -n. Does not show extra verbose  options such as -d -f -i -l -m -o -p -r -t -u -x, unless specified.

-m, --memory         Memory (RAM) data. Requires root. Numbers of devices (slots) supported and individual memory devices (sticks of memory etc). For devices, shows device locator, size, speed, type (e.g. DDR3). If neither -I  nor -tm are selected, also shows RAM used/total.

-n, --network-advanced Advanced Network card info. Triggers -N. Shows interface, speed, MAC id, state, etc.

-s, --sensors        Sensors output (if sensors installed/configured): mobo/CPU/GPU temp; detected fan speeds. GPU temp only for Fglrx/Nvidia drivers. Nvidia shows screen number for > 1 screen. IPMI sensors if present.


System:    Host: Test Kernel: 4.15.0-54-generic x86_64 bits: 64 Desktop: Cinnamon 4.2.4 Distro: Linux Mint 19.2 Tina 
Machine:   Type: Server System: Dell product: PowerEdge R310 v: N/A serial: 6VK4HQ1 
           Mobo: Dell model: 05XKKK v: A02 serial: ..CN1374013J0076. UEFI: Dell v: 1.6.4 date: 03/03/2011 
Memory:    RAM: total: 15.64 GiB used: 994.7 MiB (6.2%) 
           Array-1: capacity: 32 GiB slots: 6 EC: Multi-bit ECC 
           Device-1: DIMM_A1 size: 4 GiB speed: 1333 MT/s 
           Device-2: DIMM_A2 size: 4 GiB speed: 1333 MT/s 
           Device-3: DIMM_A3 size: 4 GiB speed: 1333 MT/s 
           Device-4: DIMM_A4 size: 4 GiB speed: 1333 MT/s 
           Device-5: DIMM_A5 size: No Module Installed 
           Device-6: DIMM_A6 size: No Module Installed 
CPU:       Topology: Quad Core model: Intel Xeon X3470 bits: 64 type: MT MCP L2 cache: 8192 KiB 
           Speed: 1229 MHz min/max: N/A Core speeds (MHz): 1: 1229 2: 2240 3: 1358 4: 2637 5: 1411 6: 1867 7: 2415 8: 2132 
Graphics:  Device-1: Matrox Systems MGA G200eW WPCM450 driver: mgag200 v: kernel 
           Display: server: X.Org 1.19.6 driver: modesetting unloaded: fbdev,vesa tty: N/A 
           OpenGL: renderer: llvmpipe (LLVM 8.0 128 bits) v: 3.3 Mesa 19.0.8 
Audio:     Message: No Device data found. 
Network:   Device-1: Broadcom and subsidiaries NetXtreme II BCM5716 Gigabit Ethernet driver: bnx2 
           IF: eno1 state: up speed: 1000 Mbps duplex: full mac: 78:2b:cb:26:34:e1 
           Device-2: Broadcom and subsidiaries NetXtreme II BCM5716 Gigabit Ethernet driver: bnx2 
           IF: eno2 state: down mac: 78:2b:cb:26:34:e2 
Drives:    Local Storage: total: 837.25 GiB used: 6.57 GiB (0.8%) 
           ID-1: /dev/sda model: VIRTUAL DISK size: 837.25 GiB 
Partition: ID-1: / size: 821.63 GiB used: 6.57 GiB (0.8%) fs: ext4 dev: /dev/dm-0 
           ID-2: swap-1 size: 976.0 MiB used: 0 KiB (0.0%) fs: swap dev: /dev/dm-1 
Sensors:   System Temperatures: cpu: 39.0 C mobo: N/A 
           Fan Speeds (RPM): N/A 
Info:      Processes: 277 Uptime: 24m Shell: bash inxi: 3.0.32