The K2548 inline calcite filter is one of Omnipure's K series inline filters that easily install directly to your water line and reduce weeping or seepage potential. This filter contains calcite, a crushed and screened white marble media, to neutralize acidic or low pH waters to a safer, less corrosive effluent. Available with various fittings to meet your water line's specifications.
NOTE: 1/4" and 3/8" refers to the outside diameter of tubing.
Specifications:
Dimensions: 10" X 2"
Replace every 6-12 months
Corrects acidic/low pH water
Available Fittings:
BB = 1/4" FPT
CC = 3/8" FPT
JJ = 1/4" Quick Connect
KK = 3/8" Quick Connect
National Pipe Thread (NPT) Size Measured Against a Ruler*
Actual Diameter (Inches)
National Pipe Thread (NPT) (Fractional)
0.405"
1/8"
0.540"
1/4"
0.675"
3/8"
0.840"
1/2"
*NOTE: A very common misconception is that a 1/4" NPT measures as 1/4 inch on a ruler or tape measurer. However, that is not the case. NPT will measure larger in diameter. Above is a sizing reference to help clarify.