Mitsubishi CC-Link Module AJ65SBTB3-16D

CC-Link small type remote I / O unit (DC input, terminal block)

 

Input format : DC input (plus common / minus common common type)

 

Number of input points : 16 points

 

Rated input voltage : DC 24 V (ripple ratio within 5%) (Allowable voltage range DC 19.2 to 26.4 V)

 

Rated input current : About 7 mA

 

Maximum number of simultaneous input points : 100%

 

ON voltage / ON current : 14 V or more / 3.5 mA or more

 

OFF voltage / OFF current : 6 V or less / 1.7 mA or less

 

Input resistance : About 3.3 k?

 

Input response time OFF ? ON : 1.5 ms or less (24 VDC)

 

ON ? OFF : 1.5 ms or less (24 VDC)

 

Input common type : 16 points 1 common (terminal trapezoid 3 wire type)

 

Input isolation method : Photocoupler isolation

 

Withstand voltage : Between DC external terminal and ground: AC 500 V for 1 minute

 

Insulation resistance : DC external terminal collective to ground: 500 VDC DC insulation resistance meter 10 M? or more

 

Protection grade : IP2X

 

Station type : Remote I / O station

 

Number of occupied stations : 1 station

 

Unit power supply Voltage : DC 20.4 to 26.4 V (ripple ratio within 5%)

 

Current : 45 mA or less (24 VDC, all points ON)

 

External wiring connection method : Communication part, unit power supply part: 7 points 2 piece terminal block (M3 screw) I / O power supply part, input / output part: 34 points Direct mounting terminal block (M3 screw)

 

External dimensions Height (H) : 50 mm

 

Width (W) : 179 mm

 

Depth (D) : 40 mm

 

mass : 0.25 Kg

 

Operating ambient temperature : 0 to 55 ° C

 

Storage ambient temperature : -20 to 75 ° C

 

Ambient operating humidity : 10 to 90% RH, non condensing

 

Storage ambient humidity : 10 to 90% RH, non condensing

 

Anti-vibration Meets JIS B 3502, IEC 61131-2 When there is intermittent vibration : Frequency: 5 to 8.4 Hz, One amplitude: 3.5 mm Frequency: 8.4 to 150 Hz, Constant acceleration: 9.8 m / s 2 Sweep count: 10 times in X, Y, Z directions

 

When there is continuous vibration : Frequency: 5 to 8.4 Hz, One amplitude: 1.75 mm Frequency: 8.4 to 150 Hz, Constant acceleration: 4.9 m / s 2

 

Impact resistance : Meets JIS B 3502, IEC 61131-2 (147 m / s 2 , 3 times in each of X, Y and Z directions)

 

Use atmosphere : No corrosive gas

 

Use elevation : 0 to 2000 m

 

Installation location : In the control panel

 

Over voltage category : II or less

 

Pollution degree : 2 or less

 

Shipping Weight : 1.3 Kg

New Plus One Year Warranty