This listing is for one pair of Oberon ArcClean CR1134 Cleanroom Arc Flash Coveralls size 2XL with Hood & size medium booties. These coveralls came from a local lab that had surplus overstocked inventory. Please note that 5 out of the 7 complete sets we are offering are all sealed in factory bags (as seen in photos). Of the remaining two sets one bag of booties is opened while the last pair of booties does not include bag. All coverall bags are sealed. Also note that the opened pair of coveralls shown in photos is not the size 2XL you will receive. The pair shown in photos was opened only to show as an example. Please feel free to contact us with any questions.


DESCRIPTION

ArcClean Coverall
Complete arc flash protection for Cleanroom Environment.

High Arc Rating, Light Weight
The Arc-Rated Cleanroom Suit is manufactured with Oberon's patent pending CR1134 material with its high ratio of arc rating to weight. CR1134 is lighter weight (3.4 oz/yd2) than the only alternative (filament aramid). CR1134 also is significantly lower in cost.

Meets ASTM F1506 02a and NFPA 70E Standards
The Cleanroom suit is designed to be worn over Oberon arc rated dailywear or Oberon arc flash suits. The pant leg diameter is large enough to accommodate a 13EE work boot without removing the boots. The front opening has a zipper covered with a multilayer placard held in place by snaps. No portion of the snap is exposed on the inside of the suit, as required by ASTM 1506-02a

Secured Booties
The booties go over the electrician's leather work boots and are held in place by snaps and elastic above the calf. Booties are available with optional molded rubber soles.


Item # Description
CR1134 Hazard Risk Category 1,2 & 2* 11 cal/cm2 EBT
- Cleanroom Coverall with attached hood
- Separate pull on Knee-high Booties