Midway Module
B2B - B2C Electronic Module Repair Solutions
Electronics Reverse Engineering Remanufacturing
Better Than New 5 Step Process
287 repaired and upgraded since 2016
BUYER SENDS THEIR MODULE TO US FOR REMANUFACTURING AND UPGRADING. NOT A SALE OF AN ACTUAL PART. READ CAREFULLY BEFORE CLICKING THE BUY BUTTON!
*1-YEAR TOTAL MODULE WARRANTY INCLUDES FREE TECH SUPPORT FOR ENTIRE TV
"Quantity available" represents the number of modules we have parts to complete in our supply chain; not a number of actual modules in stock.
SAMSUNG MODEL: UN75F6300AFXZA - POWER SUPPLY REPAIR and UPGRADE SERVICE.Board Numbers: BN44-00621C, L75S1 DHS
Typical symptoms included: TV will not power-up; TV shuts off by itself; TV continuously turns on and off by itself or until finally staying on; dead TV with or without the standby indicator lit; no picture or sound.
This is a full function repair and upgrade; we fix all failures with this module including power surge. TV repair shops may only know how to fix one problem, so why take the chance on their return shipping fee. We warranty the whole module for 1-year for any failure not just parts and labor like TV repair shops typically offer within a single symptom. We install improved and electronically overrated parts that exceed the original manufacture's design and replace good parts of inferior quality as well as the bad ones.
Let us get your electronic module up and running smoothly again or rather remake it "better than new" with our patent pending 'Better Than New 5 Step Process' © Midway Module. All rights reserved.
Turn-around time is 1-5 business days for a typical repair when parts supply lines are normal and no special order parts are needed from your device source country.
Parts repair kits being sold by salvage dealers and parts sellers who know very little about electronic circuits are substituting parts incorrectly; all of these kits are missing important parts, contain incorrect non fusible parts, which will cause fire and smoke damage when they fail, have inferior quality knock-off parts, unnecessary parts, and are not upgrades of the originals, which do not duplicate our repair, revision and upgrade, and these kits do not solve the most common failure of this module (intermittent on-off). We know this for a fact due to our customers sending us their modules weekly after failed repair attempts using these parts repair kits. In addition, positive feedback is frequently left for these repair kits stating fast shipping or thank you before the kit is installed or after installation and before the intermittent problem returns.
More importantly, a high level of soldering skill and equipment is required to replace parts on this fragile circuit board without damaging the copper lands and traces. What often happens is a novice installs all or some of the kit parts damaging the circuit board and introducing additional faults. Another common mistake is that all the kit parts are installed, but all the parts replaced were replacing good parts while missing the faulty part not included in the kit.
Electronics component level troubleshooting and repair is not based on this type of shotgun approach. It is not like paint-by-numbers, and will result in failure more than 90 % of the time causing disillusionment, frustration, time wasted, and money lost. In addition, you cannot learn electronics this way.
We have received power supply modules from customers who told us they purchased it used and it lasted only a few months or arrived D.O.A. due to the used module being salvaged from a broken screen TV. We recommend that you not make their same mistake by purchasing a 'Used' or 'New' module. Let us rebuild and upgrade your original module. Without our upgrade -- all of these power supply modules will fail prematurely due to factory design defects. Used power supply modules of this type are cooked and ready to blow.
After the rebuild is completed on your module we will install it into a television of the same make and model as yours. Then your module will be test played all night which is typically 12 hours. This is a necessary procedure to burn-in the new parts and to weed out any defects before sending your module back to you.
More importantly, we back your rebuilt-upgraded module with our *'Complete Module 1-Year Warranty', not just parts and labor within a single repair like TV repair shops typically offer. *Warranty excludes tinkering and acts of nature, but not limited to lightning damage, power surge, flood, and earthquake damage. Tinkering - intentional or unintentional defined may include, but is not limited to damage caused by pet urine, insect infestation, spilled fluids, alterations, and improper installation of module voids warranty. We reserve the right to mark your module for identification.
Here at Midway Module we have been rebuilding electronic devices of all types for over thirty-five years. In this period of time we have learned one simple rule - when new electronic products fail early they always fail for a reason. This reason can almost always be traced back to a flaw in the original design and causation is usually minor. A revision will prevent this failure from occurring again. Therefore, reverse engineering and circuit analysis become the crucial and primary step in our 'Better Than New 5 Step Process' © Midway Module. All Rights Reserved.
Errors in the design of this power supply have been causing early failures. We will revise and upgrade your module to remove these engineering faults, so your power supply does not fail again for the same problem.
In addition, we use the latest high-grade technologically advanced semiconductors and passive component parts in our module remanufacturing process, and replace defective low grade parts with American or Japanese designed industrial - military grade parts skillfully selected by our electronics engineer. Moreover, these parts are installed using our technologically advanced soldering and optical equipment for laser precision accuracy and quality of work.
We use all certified technicians to repair your module under the supervision of our electronics engineer who routs out the reason for early electronics circuit failures. After careful calculations a revision is given to the technician who implements the repair on your module so it will never fail for the same fault in design again.
We must receive your module intact without damage from previous repairs, tinkering, corrosion, or shipping. We refuse to pay shipping and handling to return a module, which has been damaged by previous repairs, tinkering, corrosion, or shipping back to you if we deem it non repairable or it tests good. However, solely at our discretion we may decide to repair your module if this type of damage is manageable, however turn-around time may increase. Buyer is responsible for initial shipping cost of sending their module to us. If the preceding terms are met and we deem your module non repairable (very unlikely) we will refund your full purchase price and return your module to you at our shipping expense unlike our competition. Buyer incurs a payment processing fee for a canceled order. Buyer agrees with these terms when clicking the 'Buy" button or by completing the purchase process.
You will receive shipping instructions after checkout.
We leave positive feedback for everyone after they do the same for us.
Thank you!
P.S. If you have a different power supply than the one listed above please send us your model number, so we can quote you a price.
All text in this listing is protected by copyright, © 2016-2023 Midway Module. All Rights Reserved.
Plagiarizing (copying) sellers will be promptly reported.