802.11g (54 Mbps)
802.11g+ (108 Mbps+)
WPA (TKIP)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
Wireless MAC Address filtering
SSID Broadcast disable
Wireless client
Wireless bridge (PtP)
Quick Setup Wizard
Windows application
TFTP (RFC 1350)
The WAP-0003 is a wireless access point with a single 10/100Base-T Ethernet port. It supports AP, AP Client and Wireless bridge modes.
This AP is 802.11b/g compatible. Using the "Super G" technology, it provides wireless transmission speeds of up to 108Mbps. It supports WEP and WPA wireless encryption and 802.1x authentication.
The WAP-0003 can be configured via Web-based configuration utility, including a Quick Setup Wizard or via SNMP v.1/v.3
| LAN / WAN Connectivity | |
| WAN ports: | 0 |
| LAN ports: | 1 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: | |
| Router | |
| DHCP server: | |
| DHCP client: | |
| Wireless | |
| Maximum Wireless Speed: | 108 Mbps |
| WiFi standards supported: | 802.11b (11 Mbps) 802.11g (54 Mbps) 802.11g+ (108 Mbps+) |
| Wifi security/authentication: | WEP WPA (TKIP) 802.1X (EAP-MD5/TLS/TTLS/PEAP) Wireless MAC Address filtering SSID Broadcast disable |
| WiFi modes: | Access point Wireless client Wireless bridge (PtP) |
| internal antenna(s): | 1 |
| external antenna(s): | 1 |
| ext antenna(s) removable ?: | |
| Transmit Power: | +18 dBm |
| Receiver Sensitivity: | -72 dBm |
| WDS compatible: | |
| Device Management | |
| Default IP address: | 192.168.1.1 |
| Default admin username: | admin |
| Default admin password: | admin |
| Administration: | Web-based (LAN) Quick Setup Wizard Windows application TFTP (RFC 1350) |
| Firmware upgradeable: | |
| Configuration backup/restore: | |
| Event log: | |
| Misc hardware info | |
| SNMP support: | SNMP v.1, SNMP v.3 |