BRAND NEW IN BOX!

SHIPS FROM USA!

Gallery Picture of the item(s):

The worlds smallest wireless spy camera, measuring just 1.9cm x 1.9cm. This mini camcorder has a full color lens and can transmit video directly to your TV or VCR up to 300ft away.

Takes a matter of minutes to setup, simply place the camera overlooking the location you wish to view. Plug the receiver into your TV, VCR, DVR or any other device with a video input. It can also be plugged into your computer with a video capture device that will enable you to record on your computer sold seperately here:

Its small enough to be hidden almost anywhere so it is ideal for use inside remote controlled vehicles, as a baby monitor, a bird box camera or as a covert camera for surveillance operations.

Extra Info

Wireless cameras are basically described as a wireless transmitter carrying a camera signal. The Camera is wired to a wireless transmitter and the signal travels between the camera and the receiver. This works much like radio. The sound you hear on a radio is transmitted wirelessly and you tune to a certain frequency and hear the sound. Wireless cameras have a channel also. The receiver has channels to tune in and then you get the picture. The wireless camera picture is sent by the transmitter the receiver collects this signal and outputs it to your Computer OR TV Monitor depending on the receiver type.

The Camera sees the image, the camera then provides the video to the transmitter, then the transmitter sends the wireless signal to the receiver. There are many types of wireless cameras. You can make most any camera wireless by adding a wireless transmitter and receiver. The camera and transmitter require power. The power is provided by battery and/ or transformer / adapter. The complete (Diagram 1) wiring for the wireless camera and transmitter end follows.

As you can see (by Diagram 1), the camera and transmitter both need power. The camera sees an image, and sends it to the transmitter, and the transmitter sends the signal out to the air. The receiver picks up the signal and outputs it to a TV / Computer / Digital Video recorder. This is a basic diagram. Many wireless cameras and transmitters are very small and the power is provided to both from one source. A good example of this is a hidden wireless camera. IE: A clock radio wireless camera is powered by plugging in the clock. The camera and wireless transmitter are provided power by the clock radio internally.

A wireless receiver has only one function. After the camera and wireless transmitters have provided the wireless video signal the receiver collects this signal and routes it the Monitor, TV, VCR, DVR or PC (or alternative recording or viewing device). See diagram 2.
As you can see in Diagram 2 the receiver accepts the wireless transmitters signal and then out puts it to your TV, VCR, Monitor or PC. The receiver needs only power and a Device to view and or record the Signal / Video.

Video Transmitters can be obtained separate from cameras. If you have a wired camera now you can turn it into wireless by adding a transmitter and receiver. Instead of the wire from the camera to the recording device or monitor the wireless signal will send the video. Again you will need to provide power to the camera and the transmitter. Most transmitters and receivers are sold as a package but some are not. Be sure to check with the supplier.

Analysis of Common Questions
1. What will you do when the indicator light does not work?
Check that the power adapter is properly inserted into AC power outlet, and make sure that AC main power switch is turned on, and the receiver connects to the power adapter well.
2. What will you do when it displays unclear image or cannot display the image?
Please check the following steps:

• (1). Keep the receiver switched on.
• (2). Keep suitable distance between the receiver and camera, so that the receiver can receive the signal from the transmitter.
• (3). Ensure there are no electromagnetic shielding obstructions between the receiver and transmitter, such as steel-structure buildings that will cause great interference to transmission signal.
• (4). Ensure the signals from the receiver and transmitter in the relative frequency. Please note that there cannot exist two or more transmitters with the same frequency within the effective receiving distance, otherwise it will interfere with each other and cause poor image.
• (5). Check the receiver antenna is mounted in place.
• (6). The receiver antenna should be far from electromagnetic shielding, such as the large copper and iron objects
• (7). Ensure there are no high-power transmission signals with the same frequency, such as radio, car radio work, because they will interfere the receiver.

TERM AND CONDITIONS

Shipping Address

• We'll ONLY ship the item to your Paypal Confirmed Address, so please make sure your shipping address is correct before you buy item.
• Buyer need ship to other address (not Paypal confirmed address) should contact before buy item.
• We are not responsible for incorrect shipping addresses provided .

Shipping Time

• Items normally get shipped out in 1 business day.
• Order placed on weekend or holiday will be shipped on Monday or next working day.

• We use USPS First Class Mail (with tracking).

* International buyer's please allow extra time for delivery, sometimes packages will be delayed in customs.

Delivery Time

Below is the approximate delivery time to different countries (just estimated, not guaranteed):
• 2-7 working days to buyer in USA

* International Orders can take 3-6 weeks for delivery if they are delayed in customs. Please chose Priority for faster delivery times and detailed tracking.

Return/Exchange

• We accept exchange/replace item within 30 days of purchase date.
• Buyer will pay the return shipping cost regardless any reasons. No exception.
• We will process RMA within 1-2 days when we receive the item back. We exchange/replace item if only item is in same condition as when we shipped out. No exception.
• ALL NON SELLER MISTAKES will be subject to a 15% restocking fee and merchandise must be in the unused condition only.

* All of our items have small unique identifiers and will be inspected upon receiving prior to any refund/ replacement being issued.