5150C-W SENTROL 5150CW GLASS SHOCK SENSORS Interlogix / UTC - 5150 Shck Snsrs w/ Coil Cord UPC 00046188069248

5150C-W Shock Sensor, Two Wire, 3 Foot Coil Cord for Doors and Windows


 

The 5150 series are the most low-profile glassbreak sensors in the industry. Adhering directly to the glass, the sensor acts as a visual deterrent for areas up to 10 feet (3 m).

Advanced piezo technology powers the sensors, so no power is needed from the loop. The piezo generates its own electricity when it bends as the glass breaks. Because the transducer must bend for the sensor to go into alarm, false alarms are nearly eliminated. Reliable range verification testing allows the user to confirm the sensors perimeter detection.

The 5150 series sensors are ideal for retrofit installations where 2-wire protection is most practical.

5150C-W

On-the-glass piezo sensor with coil cord

  • 3 m radius of coverage measured from the sensor
  • Protects all glass types up to a standard thickness of 6.4 mm including plate, wired, tempered and laminated glass
  • Ideal for 24-hours loop protection
  • Two wire sensor, drawing no power from the loop
  • Compatible with most wireless transmitters
View all
 
 

At a glance

 

The Sentrol 5150 series glass break detector has been designed using the latest electronic techniques. This enables the detector to contain all the necessary circuitry for excellent detection whilst filtering out and rejecting all unwanted signals that would normally result in a nuisance alarm(s), e.g. ultra-sound, radio frequency interference, etc. The 5150 series will provide a 3 m radius of protection. Suitable for use on standard window glass, plate, wired, tempered and laminated glass.

 

Due to the design of the product, the detector may be fitted as close as 2.5 cm from the window frame and still provide a full 3 m radius. The 5150 series detectors are passive sensors; therefore any number of detectors may be installed on the same windowpane without the risk of interaction.