FREE SHIPPING WITHIN THE CONTINENTAL USA...

AND DISCOUNTED SHIPPING TO ELSEWHERE IN THE WORLD!

We are proud to say that ALL of our products and the raw materials used in them, are MADE IN THE USA

YOU CAN START MAKING THESE PAVERS IMMEDIATELY!

THESE 3" THICK PAVERS WILL SUPPORT VEHICLES WHEN SET IN A PROPERLY PACKED SAND BASE!

WANT THE FREEDOM AND INDEPENDENCE OF YOUR OWN BUSINESS? OR JUST WANT TO MAKE THESE PAVERS FOR YOUR OWN USE? WE ARE THE SOURCE.

The "HOW TO" process is so simple... virtually anyone can do it!

 

It's like making a cake! But no oven is needed!

  HERE'S HOW...
 

1. Lubricate the molds... a light vegetable oil will do if you don't have mold release.

 

2. Mix a bag of pre-mix concrete… get a shovel, water, and something to mix it in.

 

3. Add some concrete color, which is optional… unless you want just plain gray.

 

4. Pour mix into molds… vibrate a bit to compact concrete and release air bubbles.

 

5. Let the filled molds sit a day or so, undisturbed… over-night is fine.

 

6. Carefully flip the molds over the next day… and pop out what you’ve created from the mold!

 

That is obviously a simplified version of the process, but it is that easy. And FREE instructions and email support are included with each purchase.

HERE IS WHAT YOU ARE PURCHASING IN THIS #5006-K SUPPLIES KIT:

This kit includes all material needed to make hundreds of square feet of pavers or tiles, except for the concrete mix and water. No special equipment, experience, or skills are required to make beautiful custom-colored stone for your project. JUST FOLLOW OUR SIMPLE INSTRUCTIONS. Many of the project photos on our websites were done by first-time producers. Each mold can be used 100s of times if cared for and used properly. If you need additional molds, they can be purchased in our store after or while purchasing this kit. And instructions and support are included FREE!

You are also purchasing one set of 12 molds (Set #P-5006), consisting of FOUR 6"x6"x3", TWO 6"x12"x3", FOUR 12"x12"x3", and TWO 12"x18"x3" thick Paver Molds that will make a 36-inch square (9 square feet) batch of pavers or tiles per pour using all of the molds. When combined, they make up the popular four-size Opus Romano Pattern as illustrated in the photo above. The paver or tile surface will be smooth, with "pillow" edges and corners... meaning slightly rounded. The mold photos illustrate a rough surface, but that is only on the outside of the mold... not the molding surface.

These pavers or tiles are ideal for using the Travertine finish technique on. With it, you achieve a true Travertine finish with controlled quantity and texture of bug holes, and roughness. you get the look of smooth finished travertine when grout is used afterwards to fill these holes and textures in, especially when using white grout. Note the photo of the dining area floor.

This set of molds is designed to make the Opus Romano Square Pattern illustrated above, using 12 pavers or tiles of four mixed sizes. The pattern measures a nominal 36"x36" square, or 9 square feet of area. Or you can choose our other four-pattern Opus Romano Sets (P5006-OR) which allows you to make the same pattern area in only one pour. Either one makes a 9 square foot pattern per pour using four sizes as illustrated in those pattern diagrams, just in different quantities of the sizes of molds.

And if you want a Travertine type of finish like the photo, we will provide Free instructions on how to get and control the number of worm-holes and surface roughness on the pavers. Just go to our Free Training and Instructions website at TheMoldStore.info for instructions on this and other techniques you can use.

Larger quantity sets to make more molds per pour are available elsewhere in the store as well, and include FREE SHIPPING!

 

THESE ARE FOR WHEN YOU WANT SOMETHING REALLY UNIQUE?

This mold set is part of our popular Opus Romano pattern of tiles and pavers. You seldom, if ever, see 3" thick Pavers like these in the sizes needed to put together the Opus Romano patterns. And we have not seen pavers thick enough for driveways in an Opus Romano pattern anywhere else. Basically, the Opus Romano pattern needs four sizes that are 6"x6", 6"x12", 12"x12" and 12"x18", or three sizes that are 6"x6", 6"x12", and 12"x12", depending on preferences.

You receive FREE instructions on how to make the stone, and how to lay it, (if needed), with your purchase.

Larger quantity sets are available elsewhere in the store as well, and include FREE SHIPPING!

WANT SOMETHING REALLY UNIQUE? CONSIDER THE OPUS ROMANO LAYOUT PATTERN .

This mold is part of our popular Opus Romano pattern of tiles and pavers. You seldom, if ever, see thick Pavers like these in the sizes needed to put together the Opus Romano patterns. And we have not seen pavers thick enough for driveways in an Opus Romano pattern anywhere else. Basically, the Opus Romano pattern needs four sizes which are 6"x6", 6"x12", 12"x12" and 12"x18". Or the less random pattern consists of three sizes that are 6"x6", 6"x12", and 12"x12". These patterns can also be made with eight-inch base sizes as well as this 6" base size. We offer our Wind Swept Tile in the 8" Opus Romano Patern sizes. The photos above of the Burnt Orange colored Opus Romano Pattern are in the 8" format just to illustrate what the pattern looks like. There are also drawing of the Opus Romano pattern there. We will also provide a copy of the patterns and instructions for you to lay the pavers out in a couple of different Opus Romano patterns.

SAVE MONEY WHEN YOU PURCHASE AN ENTIRE SET OF OPUS ROMANO MOLDS

We also offer the entire three-size and four-size Opus Romano Paver Molds in sets if you want to use either of those patterns. They are available as listings as well.

These #P-12123 paver molds, like all of our tile and stone molds, can be used hundreds of times, as they are made with special, extra thick .093 high-impact, rubberized ABS for long life. The paver molds in this listing make a paver that is 12"x12"x3" thick and they are designed to be used for driveways, patios, walks, edginging, cobblestones, etc. We have hundreds of other different styles, sizes, textures, and shapes of molds to choose from . If there is something you'd like that you do not see in our store, let us know. We may be able to make it for you... or you may have missed it in our store.

We normally recommend that these pavers be poured to at least 2.5" thick when being used for a driveway, and really prefer that they be poured to their full 3" thickness. You can custom finish these pavers, and make them in virtually any color that you can imagine. Be sure to view the photos in this listing, as well as visit our other websites to see examples of the Opus Romano patterns in larger photo formats.

Remember... FREE instructions are included with each purchase, and help is only an email away. Feel free to email your questions to us. We'll get right back to you with an answer or a solution. Thank you for your interest in our products.

These pavers also make excellent Garden Edgings for flower and vegetable beds, walks, etc. and as patio pavers when poured to 1.5" thick. And don't forget that you can pour them to 1/2" thick and make floor tiles with these molds as well.

IN SUMMARY: Here are molds to make thick concrete driveway pavers that measure 12"x12"x3" and are capable of handling vehicular traffic over a properly packed sand and gravel base driveway. Pour them 1.5" thick for patio pavers. Or pour them 1/2" thick for floor tiles. So you can use them for three different applications... driveway pavers, patio pavers, tiles!

DO YOU HAVE A LARGE PROJECT, LIKE A DRIVEWAY? SAVE BIG BY ORDERING IN QUANTITY. SEE OUR OTHER LISTINGS IN THIS AND OTHER STYLES OF PAVER MOLDS WITH MORE MOLDS AND FREE SHIPPING!

Remember, these molds can be used hundreds of times if cared for per our simple instructions as they are made with extra-thick .093 high-impact industrial, rubberized ABS for long life, flexibility, and durability.

SHIPPING INFORMATION - PLEASE READ

We normally ship from our Port Charlotte, Florida shipping facility daily each work week. Orders are shipped via either UPS or USPS. Orders are normally ready within a day of receipt of payment. The rest of the time it takes to get to you is due to the carrier. Please allow sufficient time for transit before contacting our shipping department with questions about the whereabouts of your order. Please understand that it takes over a week "in transit" for packages shipped to the western USA. Figure ten days total. Please remember that UPS and other carriers DO NOT work on weekends... and once in a great while... we don't either! :-)

  ABOUT COLORS

We provide you with instructions in the various techniques to achieve a custom colored tile or stone. But other than formulas for the basic colors in our brochure, you will have to experiment. We cannot give you the formula for a color that is "in your head". Color is somewhat "subjective". What you might refer to as a "pink" color, might be our perception of a "rose" color. Our "powder blue", might be your "light blue", etc., etc. For that reason, we can only give you some "base" color formulas. You will have to work on any changes from that formula to get exactly what you want as a finished color, as seen in your mind's eye.

  Interested in starting your own business? 

Become an "Olde World Stone & Tile" Producer Today!

Since 1992, we've trained hundreds of entrepreneurs worldwide to start and succeed in their own tile and stone manufacturing businesses! Our business is mold design and manufacturing, so our success is truly dependent on your success!

SEE OUR OTHER LISTINGS FOR MORE MOLD STYLES AND SIZES, AND FOR MORE INFORMATION ABOUT OUR BUSINESS OPPORTUNITY PACKAGES.

Visit our Store and check out our other items! Click here to be sure to add us to your favorites list!

For additional product information, tile and stone installation photos, and more... visit our extensive TheMoldStore and Oldeworld websites, or if you have questions, feel free to call or email us.