Round silver locket key ring key chain can fit a photo or special note inside. Locket opens with space for a photo on each side. The round locket is silver color with black decorative engraving on the front. The inside of the locket is antiqued silver color; that means silver color with black accent coloring for a vintage, antiqued look. A small note can be folded up to keep inside or you could even put a small lock of hair inside from a loved one. (Tie or secure the lock of hair together before you put it in.) You can also use this key chain as a charm dangle by attaching the key ring to a strap on a backpack, purse, or bag, or on a belt loop. You could also attach the key ring to a zipper and have the locket charm as a zipper pull, as long as the zipper has a hole in the end to attach the key ring to.

SIZING:

Total length of the key chain is two inches. The locket itself is 20mm in size (right between 3/4-inch and 1-inch). When opened, it is about double that size across. The locket snap securely closed.
 
Key chain is 2 inches total length.
 
Locket is silver color with black outlines and accents engraved on the front. It is 20mm (which is in between 3/4 and 1-inch) in size.

*For sizing photos for the locket, distance photos work best so that the heads in the photos will not be too large. Place the locket over the photo and trace the shape of the locket around it. Then, cut out the photo a little smaller than the trace line so that it will fit inside the locket. Last of all, secure the photo in the locket, using tape or glue if needed. If using glue, be sure to leave the locket open while the glue dries.

*All of my photos are taken by me and belong to me so please don't use them. Thanks!