|
THERMOCOUPLE 39" LONG
REPLACES PART DESA NUMBER 098514-01
Also sold as
098514-01,09851401,098514 01, 71-031-1020, 710311020,71 031 1020, lowes TC, 25097,TC,
The 098514-01 Thermocouple will fit the following Comfort Glow Vent-Free wall heater model numbers:
CGCF26T, CGCF26TNA, CGCF26TP, CGCF26TPA, CGN6, CGN6L, CGN6LA, CGN10, CGN10A, CGN10L, CGN10LA, CGN10R, CGN10RL, CGN10RLA, CGN10T, CGN10TL, CGN10TLA, CGN12, CGN12A, Charm Glow, CGL250TE-C Series Heaters
The 098514-01 Thermocouple will fit the following Blue-Flame Vent-Free Natural Gas Heater wall heater model numbers:
CGN18, CGN18A, CGN18B, CGN18C, CGN18T, CGN18TA, CGN18TB
ProCom and Cedar Ridge Units:
SSN18TB, SSL18TB, MD200TBE, CGD280TA, CGD280 TA
The 098514-01 Thermocouple will fit the following Comfort Glow Vent-Free Natural Gas Compact Fireplace model numbers:
CGN18TLB, CGN18TL, CGN20
CGN20L
CGN20B
CGN20LB
CGN20T
CGN20TL
CGN20TB
CGN20TLB
CGN28T
CGN28TA
CGN28TB
CGN30
CGN30C
CGN30D
CGN30T
CGN30TL
CGN30TB
CGN30TLB
CGP6
CGP6L
CGPGLA
CGP10
CGP10L
CGP10LA
CGP10R
CGP10RL
CGP10RLA
CGP10T,
CGP10TL
CGP10TLA
CGP11
CGP11A
CRP16T
CGP18
CGP18A
CGP18B
CGP18C
CGP18T
CGP18TA
CGP18TB
CGP18TBL
CGP18TL
CGP20
CGP20L
CGP20B
CGP20LB
CGP20T
CGP20TL
CGP20TB
CGP20T
Installation
Installing 098514-01 and other similar thermocouple kits.
1. Turn gas off to appliance.
2. Remove front panel from heater by removing the screws holding front panel to the cabinet.
3. Remove thermocouple wire from gas valve base by turning ?tting counter clockwise with a 5/16" wrench (see Figure 1).
4. Locate the pilot assembly and, with a Phillips screwdriver, remove screw that holds the bracket for the thermocouple and igniter (see Figure 2).
5. Remove thermocouple and replace with new thermocouple.
6. Replace bracket and tighten screw.
7. Finger tighten thermocouple wire ?tting at base of gas valve. With 5/16" wrench, turn ?tting 1/4 turn clockwise.
8. Replace front panel on heater.
9. Turn gas on to appliance.
Figure 1: Thermocouple Connection to Gas Valnes
Figure 2: Pilot Assembly
WARNING !!!
ONLY QUALIFIED SERVICE PERSONEL SHOULD ATTEMPT TO REPAIR GAS EQUIPMENT
|