Ladies fashionable walking cane with genuine solid brass Derby-style handle, beautifully embossed. Cane shaft constructed of solid maple wood with black finish and tapers from 7/8". Length of 36". Rubber tip included.

Manufacturer: *Harvy (USA)
*All Harvy brand canes are not meant to be weight bearing-canes but used putting maximum weight on the main shaft of the cane rather than the extreme ends.

"Ladies" brass handle and cane shaft are smaller than Men's/Unisex cane styles. See dimensions, below:

Handle Width: 4 inches
Handle Diameter: 3/4"
Cane shaft: Tapers from 7/8"

Unless the intended cane user is about 6 feet tall, this 36" long cane (cane manufacturers' standard length) will need to be sized to the proper length.


Therefore, we recommend that you size the walking cane to the proper length, following our helpful guidelines, below. They will also be included with your order.

ONCE SIZED, WALKING CANE BECOMES A PERSONALIZED ITEM AND, THEREFORE, EXEMPT FROM THE REFUND POLICY. REFUNDS ARE ISSUED FOR "LIKE NEW" CONDITION, ONLY - NO EXCEPTIONS.

BE CERTAIN YOU ARE ARE KEEPING THIS ITEM BEFORE SIZING IT!!!!!


GUIDELINES FOR MEASURING CANE LENGTH AND CANE-SIZING

Ideally, if requiring a walking cane as a mobility aid, consult a Physical Therapist to determine the proper length.

Otherwise, please carefully follow the proceeding guidelines to determine the proper cane length:

It is strongly recommended that you have someone assist you when measuring for the proper cane length for the first time.

DETERMINING PROPER CANE LENGTH.

Standing erect with both arms relaxed at your sides and wearing the shoes that your normally wear, measure from the floor at the outer side of the heel to your mid wrist (second skin crease of inner wrist)

AT PROPER CANE LENGTH:

RELATIVE PERSPECTIVE

Cane length is usually about one half the cane user's height, in inches, wearing shoes.*

Example: Height (with shoes) = six feet = 72 inches

Half of 72 inches = 36" cane length

* Please note: The "relative perspective" calculation, explained above, is not the ideal means of determining proper cane length but serves to provide a general perspective. The ideal and accurate method is that which is described above, measuring "heel to wrist".

MEASURING LENGTH OF EXISTING CANE

To measure the length of an existing cane*, measure from highest point of cane handle down the entire length of the cane including the rubber tip. However, this is not recommended unless the "heel to wrist" method, described above, was used to determine the proper length of the existing cane.

*Measuring an existing ADJUSTABLE CANE is NOT RECOMMENDED to determine the correct length for your cane. Follow the "heel to mid-wrist method" previously described.

CUTTING EXISTING CANE TO PROPER LENGTH

If you prefer to order your walking cane or walking stick "UNCUT" and size it yourself, please follow these simple instructions:

1. Measure from highest point of cane handle to end of rubber tip.

2. Subtract desired length from existing length to determine the length difference to be cut off.

3. Remove rubber tip.

4. Measure from end of cane, the difference in length you've determined in step 2.

5. Mark off with masking tape around circumference of cane.

6. Using edge of masking tape as your guide, cut straight across using household saw *.

7. Replace rubber tip securely.

*If it's not feasible to cut the cane yourself, the large home improvement stores in your area will cut your cane to your specified length, free of charge or for nominal fee.

THANK YOU FOR YOUR INTEREST IN THIS ITEM!