Nylon gear LP-1014 , the old PN: LA-1213 or L-1438
For Logan 820 lathe, LB gear boxes L-B210 and LA-1240-2
For Logan 9", 10" 11" & 2900 Series 12" Lathes (20 D.P.) Logan
Lathe Assembly LA-1240-2 Gear Boxes
40 tooth gear OD: 2.1" (53.35mm) 40 tooth gear face width: (0.28 9/32) Overall width at hub: 0.375" (3/8") Center bore 0.375 (3/8") Diametrical Pitch (DP): 20 This gear FDM made out of Nylon - tough and flexible plastic
No lubrication required
Runs quieter and smoother than Zamak
Please clean existing metal gears out of chips or shavings in the bottom of the gear train.Please file off any lumps and sharp edges on the steel gear.Metal shards will impact nylon gears longevityOnly Nylons should be used for gears where a slippery surface is desired.
All other materials (PLA, ABC, PET, etc.) will grind creating a plastic dust and eventually fail!
For details, please review all pictures and compare to OEM gear shown
Do not waste your money for ABS, PLA plastic gear that may strip or melt
Thank you. |