Square D FSG2J21M4CP Pressure Switch Telemechanique Sensors Pumptrol 30 - 50 psi
Features low water cut-off switch to shut off pump at 12 P.S.I. to prevent overheating damage to submersible well pumps. Recommended for submersible pumps. Compatible with jet pumps, submersible pumps, and reciprocating pumps. The standard action contacts open on rising pressure. Diaphragm actuated - 1/4" 18 NSF internal threads.
- Boxed
- 1/4 in. pressure connection
- Low pressure cut-off
- Low Pressure Cut-Off; Standard-action contacts open on rising pressure
- 30 - 50 psi
- Suitable for jet pumps, submersible pumps and reciprocating pumps
- 30-50 PSI Pumptrol Water Pressure Switch with Low Pressure Cut-Off
- This Square D Pumptrol FSG2J21M4CP electromechanical pressure switch is the most trusted brand in residential, commercial and industrial pumping applications. For over 75 years, Square D pressure switches continue to meet the needs of our customers. This switch has a 30 PSI to 50 PSI pressure setting range activates an electrically driven water pump within a power circuit when the adjustable rising and falling thresholds are reached. The NEMA 1 enclosure has a 1/4 inch NPSF internal fluid connection and screw clamp terminals. The switch works with a 1.5 HP or less pump. The adjustable differential range is 15 psi to 30 psi and the cut-out range is 20 PSI to 65 PSI. The low-pressure cut-off (auto-start-off) operates at approximately 10 psig below the cut-in and will turn off the pump. The enclosure is National Electrical Manufacturers Association (NEMA) Type 1 and Ingress Protection (IP) 20 rated. The switch is Underwriters Laboratory (UL) Listed and Canadian Standards Association (CSA) Certified. Square D Pumptrol pressure switches are manufactured by Schneider electric.
-