TyanThunder Le-T (S2518GNR) Motherboard

Dual Socket 370 motherboard

Tyan Thunder Le-T (S2518GNR) Motherboard, Dual socket 370, supports Pentium III (FC-PGA), Chipset ServerWorks ServerSet III LE3, FSB 100/133, Up to 4 Gb in Ram pc 133, Promise FastTrak100 IDE RAID controller, 1 PCI 64, ATI RAGE XL graphics, EATX.

  • Storage:
    • Dual-channel master mode
    • Up to four Enhanced IDE devices
    • Support for ATA-100/66/33 IDE and ATAPI-compliant devices
  • Rear Panel I/O Ports:
    • One serial port and one VGA port
    • Stacked USB (two) ports
    • Stacked keyboard and mouse ports
    • Side-by-side LAN (two) ports
  • Internal I/O Interface:
    • One floppy connector supports up to two drives: microfloppy support via optional cable
    • Two USB (Via Cable)
    • one 25-pin SPP/ECP/EPP parallel port via optional cable
    • One 9-pin 16550-based serial ports
  • Integrated IDE RAID:
    • Promise FastTrak100 IDE RAID controller
    • Dual-channel master mode
    • Support up to four Enhanced IDE devices
    • Support for UDMA 100/66/33 IDE drives
    • Supports IDE RAID levels 0, 1 and 0 1
  • Hardware Monitoring:
    • Winbond W83782D hardware monitoring ASIC
    • 2-pin chassis intrusion header
    • CPU temperature and voltage monitoring
  • Integrated Video:
    • ATI RAGE XL graphics controller
    • 4MB frame buffer (SDRAM)
    • Standard 15-pin analog VGA port

Motherboard Specifications

  • Model:
    • Thunder LE-T (S2518GNR) Motherboard
  • Processor Support:
    • Dual PGA370ZIF sockets
    • Supports up to 2 Intel Prntium III processors (FC-PGA)
    • Two onboard VRMs (VRM 8.4 spec)
  • Chipset:
    • ServerWorks ServerSet III LE3 chipset
    • Integrated I/O APIC OSB4 south bridge
    • SMsC FDC37B787 Super I/O ASIC
  • FSB:
    • 100MHz and 133MHz
  • Memory:
    • Four 25 angled 3.3v 168-pin DIMM sockets
    • Angled sockets enable rackmount installation
    • Up to 4GB PC133 Registered SDRAM
    • Support for ECC (72-bit) memory modules
  • Expansion Slots:
    • One 64-bit 66MHz (3.3-volt) PCI slot and one 64-bit 66MHz (5-volt) PCI slot.
    • 3.3-volt slot supports Adaptec 2000S Zero-channel RAID controller
    • Total of two usable slots (one if installed in 1U)
    • PCI riser card required when installed in 1U/2U
  • Regulatory:
    • FCC DoC (Declaration of Conformity)
    • European CE (Declaration of Conformity)
  • Integrated LAN Controllers:
    • Dual LAN controllers (Intel 82559)
    • 10/100Mbps data transfer rate per controller
  • BIOS:
    • AMI BIOS on 4Mb Flash ROM
    • User settings for hardware monitoring
    • Auto configuration of IDE hard disk types
    • DMI 2.0 compliant
    • Multiple boot options
  • Form Factor:
    • ATX footprint (12" x 9.6", 304.8mm x 243.84mm)
    • One 20-pin ATX power connector