Item description for Wurth 5526835125 SPEED GALA DIAMOND CUTTING DISC 125mm

Diamond cutting disc specifically developed for garden and agriculture work with very high ease of cutting and long service life

Optimised cutting quality, specifically in natural stone

The special composition and finely toothed closed cutting edge facilitate absolutely precise, rapid cuts and clean edges.

Absolutely smooth running

Disc does not wobble or vibrate owing to corrugated carrier and specifically aligned vent openings

Notice

Diamond cutting discs become blunt at excessively high rotation speeds and wear too rapidly at insufficient circumferential speeds
If ease of cutting is lost (indicated by heavy sparking), resharpen the disc in abrasive material, e.g. sandstone, with several cuts
Separate larger workpiece cross-sections into several sections (swing cut)
Work without applying pressure — the weight of the machine is sufficient. Increased pressure causes increased wear.
Diamond cutting discs are designed for straight cutting. Cutting curves deforms the blade and results in core cracks and segment tear-offs — risk of injury!
Despite the level of safety offered by the tool, always wear safety glasses and clothing while working
Observe the information on the label (max. rotation speed), the restrictions of use and the safety instructions
The direction arrow on the disc must match the machine's direction of rotation
Must not be used for lateral grinding
Use the appropriate protective hood
Clamping must be performed only by a trained specialist (do not use force, use clean clamping flanges of the same size, perform a test run)
If grinding tools are clamped wrongly or used incorrectly or are damaged, they represent a danger and may cause serious injury