About this item
- Fitment: The Blower Motor Assembly Fit For 2007-2013 Acura MDX, 2006-2012 Acura RDX, 2009-2014 Acura TL, 2009-2014 Acura TSX,2006-2011 Buick Lucerne. For more options please see the description below
- Function: At the heart of most automotive HVAC systems is a component called a blower motor. This descriptive term refers to the fact that these components are electric motors that are attached to fans and used to move air through the HVAC system.
- Durable & Safe: Our Blower Motor use imported copper core socket to prevent poor contact and prevent the current too large and burn the blower, have the advantage of impact resistance, heat resistance, aging resistance and high hardness.
- Comprehensive testing: Outstanding materials and sub-components provide maximum strength and durability. The heater blower motor has 100% inspection before delivery, including noise, vibration, current, speed, low voltage start and so on.
- Note: Every Blower Motor must take inspected and tested multiple times before the shipment
*The AC Blower Motor is responsible for producing air that goes through the vents of your vehicle's AC and heating system.
*If your AC or Heater does not produce or circulate any heated or cooled air then you may have a problem with your blower motor.
*Step up from the ordinary, It is time to replace the blower motor that has stopped running.
*-Fit for 2011-2017 Ram 2500 3500 Truck without Dual Zone Temperature Control Heater Blower Motor with Fan Cage
Weak airflow for both the heating and cooled air coming out of the vent
No air pushing through the vents (motor broken down or bad control module)
Unusual blower noise such as a rattle or squeak (worn motor or bad bearings)
If you have an overheating blower motor, would be a burning smell coming from your air vents
Material of rotor punching plate is silicon steel sheet,avoid burning of motor
-When you replace the blower motor, it is recommended to replace the new blower motor resistor.
-Please use the year/make/model drop down bar confirm the compatibility before purchasing.
1.Remove the screws under the passenger side dashboard of the vehicle.
3.Disconnect the blower motor electrical connector.
5.Compare the new blower motor to the old one to verify that you have the correct part.
6.Install the new blower motor into the box and tighten the screws.
8.After the installation is complete, turn on the air conditioner and check if it is running normally.