Youxmoto 700230 HVAC Blower Motor with Fan Cage for Toyota Corolla 2009-2013 (Only for with Manual AC), 2009-2013 for Matrix, 2006-2018 for Rav4, 2008-2015 for Scion Xb, 2011-2016 for Scion tC
Item Description

About this item

  • Compatible with: The Heater Blower Motor fit for Toyota Corolla 2009-2013(it only fits the vehicle with Manual Temperature Control) , 2009-2013 for Toyota Matrix, 2006-2012 for Toyota RAV4 , 2013-2018 for Toyota RAV4 w/o ATC, 2008-2015 for Scion xB, 2011-2016 for Scion tC
  • Feature: In the production of blower motor, The high-quality components used are designed for plug-in type and the plug-in type is easy to install. Motor testing ensures comfortable air flow without excessive noise
  • Effect of heater blower motor: The blower consists of a speed-adjustable DC motor and a squirrel-cage fan that blows air through the heater core and heats it into the vehicle. By adjusting the speed of the motor, the amount of air supplied to the cabin can be adjusted.
  • Durable & Safe: Our Blower Motor Resistors use imported copper core socket to prevent poor contact and prevent the current too large and burn the blower, have the advantage of impact resistance, heat resistance, aging resistance and high hardness.
  • Every Blower Motor Resistor must take inspected and tested multiple times before the shipment
*The AC Blower Motor is responsible for producing air that goes through the vents of your vehicle's AC and heating system.
*If your AC or Heater does not produce or circulate any heated or cooled air then you may have a problem with your blower motor.
*Step up from the ordinary, It is time to replace the blower motor that has stopped running.
*When you replace the blower motor, it is recommended to replace the new blower motor resistor.
*Please use the year/make/model drop down bar confirm the compatibility before purchasing.

Weak airflow for both the heating and cooled air coming out of the vent
No air pushing through the vents (motor broken down or bad control module)
Unusual blower noise such as a rattle or squeak (worn motor or bad bearings)
If you have an overheating blower motor, would be a burning smell coming from your air vents
Material of rotor punching plate is silicon steel sheet,avoid burning of motor
1.Remove the screws under the passenger side dashboard of the vehicle.
3.Disconnect the blower motor electrical connector.
5.Compare the new blower motor to the old one to verify that you have the correct part.
6.Install the new blower motor into the box and tighten the screws.
8.After the installation is complete, turn on the air conditioner and check if it is running normally.

Payment
We accept payment only through PAYPAL

Shipping
We ship products worldwide through standard express courier service, it will reach within 7 to 10 days to abroad buyers, we ship the product after recieved clear payment and give full information about shipment to the buyer
Return
We accept product return 25 days from delivery date but product should be in original condition.