Youxmoto 700027 A/C Heater Blower Motor with Fan Cage fit for Ford Expedition 1997-2002, fit for Ford F150 1997-2003,fit for Lincoln Navigator 1998-2002 Air Conditioning HVAC Blower Motor
Item Description

About this item

  • Fitment: The heater blower motor fit for Ford Expedition1997-2002, fit for Ford F150 1997-2003, fit for Lincoln Blackwood 2002, fit for Lincoln Navigator 1998-2002, fit for Ford Explorer 2002-2005
  • Effect of blower motor: The blower consists of a speed-adjustable DC motor and a squirrel-cage fan that blows air through the heater core and heats it into the vehicle. By adjusting the speed of the motor, the amount of air supplied to the cabin can be adjusted.
  • Advantage of blower motor: Wind power strong and No noise. Adopt new technology and excellent production equipment to make products more environmentally friendly and energy-saving.
  • High Performance: Adjusting the fan speed sends a signal through a resistor to the blower motor to either pick up the pace or slow it down. The blower motor resistor adjusts the amount of current going to the blower motor based on the selected fan speed.
  • Notice: Please check the description and compatibility chart before your purchasing.
› See more product details
*The AC Blower Motor is responsible for producing air that goes through the vents of your vehicle's AC and heating system.
*If your AC or Heater does not produce or circulate any heated or cooled air then you may have a problem with your blower motor.
*Step up from the ordinary, It is time to replace the blower motor that has stopped running.
*When you replace the blower motor, it is recommended to replace the new blower motor resistor.
*Please use the year/make/model drop down bar confirm the compatibility before purchasing.

Weak airflow for both the heating and cooled air coming out of the vent
No air pushing through the vents (motor broken down or bad control module)
Unusual blower noise such as a rattle or squeak (worn motor or bad bearings)
If you have an overheating blower motor, would be a burning smell coming from your air vents
Material of rotor punching plate is silicon steel sheet,avoid burning of motor
1.Remove the screws under the passenger side dashboard of the vehicle.
3.Disconnect the blower motor electrical connector.
5.Compare the new blower motor to the old one to verify that you have the correct part.
6.Install the new blower motor into the box and tighten the screws.
8.After the installation is complete, turn on the air conditioner and check if it is running normally.

Payment
We accept payment only through PAYPAL

Shipping
We ship products worldwide through standard express courier service, it will reach within 7 to 10 days to abroad buyers, we ship the product after recieved clear payment and give full information about shipment to the buyer
Return
We accept product return 25 days from delivery date but product should be in original condition.