DC DC Boost Converter 12V-28V 30V 32V 24-28V 1-10A 12-30V Step Up Equipment
This DC-DC Boost Converter is designed to convert a 12V or 24V DC input into a higher voltage output, ranging from 28V to 32V. It is ideal for a wide range of applications such as industrial automation control, LED lighting, car equipment, power equipment, medical instruments, audiovisual products, and more. It efficiently steps up 12V or 24V battery voltage to 28V/30V/32V DC for various electronic devices.
Key Precautions:
Long-term use should be below full load for optimal performance. It's recommended to run at 50% of the maximum power to avoid overheating.
Ensure all connections, including polarity, are correct. Pure copper cables are required, and input/output wires should not exceed 2 meters.
Always connect a fuse or air switch on the input side for protection.
Make sure the battery is large enough to provide sufficient energy, or the voltage may drop.
Do not connect directly to solar panels or wind turbines, and non-charging models should not be used to charge batteries or lithium cells.
Ensure the installation environment is well-ventilated to prevent overheating and current limit issues.
Installation Steps:
Turn off all power supplies before wiring.
Connect output (-) and output (+) to the load’s negative and positive terminals.
Install a fuse or air switch to input (+), then connect the battery's positive and negative cables.
Double-check all connections and turn on the power and load switch.
If using the ACC function, connect the ACC to the ignition switch or to the input (+) battery positive.
Troubleshooting:
If there’s no output voltage, check wiring connections, battery charge, and fuse condition.
Ensure the load is not drawing too much current and the unit is well-ventilated to prevent overheating.
If any questions arise, feel free to contact us. We will answer You quickly.
Shipment usually takes 10-35 business days.
If You need bigger quantity – simply contact us.