Flashforge Dual Color PLA Filament is a high quality filament, made from high quality virgin plastic and with strong colours, supplied in vacuum packaging for freshness. Wound to prevent tangles, tight tolerance control and quality material ensures great prints every time. Suits most FDM 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Eaythreed and more.
These Dual Colour and the three High Shine Abyssal Red, Abyssal Purple and Burning Titanium bring a unique colour twist to your prints.
Looking for another type of filament? Check our booth for more options
Features:
- Environmentally friendly: Flashforge PLA filament 1.75mm is drilled from corn grain, has no odour omitted in use, and passes the EU RoHS certification. Flashforge filament PLA 1.75 is suitable for teenagers and children to use at home or school, harmless to the human body.
- High precision: The wire diameter of Flashforge PLA filaments is strictly controlled, with deviation less than 0.05mm. Effectively improving 3D printing effects.
- Strong compatibility: Flashforge best PLA materials are applicable to mainstream FDM 3D printers on the market.
- Good fluidity after melting: Greatly reducing problems of nozzle plug
- High strength: Flashforge PLA filaments ensure high hardness of the printed models. Wear resistant and durable in use.
Specifications:
- Filament Diameter: 1.75mm
- Tolerance: ± 0.05mm
- Print Temperature: 190-220°C
- Recommended Print Speed 60-90mm/s
- Produced mainly from Corn Starch, eco friendly material.
- Net Weight: 1kg (inc spool)
- Gross Weight: 1.3-1.4kg
- Tensile Strength: ?60 MPa
- Elongation at Break: ?3 %
- Flexural Strength: ?60 MPa
- Flexural Modulus: ?2500 MPa
- IZOD Impact Strength: ?16 J/m
- Layer Thickness: 0.1-0.2 mm
- Heat Deflection Temperature: ?55 °C
FAQ:
- Clogging: Clogging can occur due to an uneven wire diameter or a temperature that is too low. To reduce the likelihood of clogging, clean the nozzle prior to use and increase the temperature.
- Stringing: Wire stringing can occur if the temperature is excessively high, the PLA flow is too rapid, or the feed parameters are incorrectly set. Adjusting the temperature and speed settings appropriately can resolve these issues.
- Over Extrusion: Excessive extrusion at the nozzle outlet, resulting in residual material, can be caused by a temperature that is too high, a speed that is too slow, or a mismatch in the nozzle diameter.