Item description for SELKIRK 206430 Wall Support Kit, Type HT, Stainless Steel, Galvanized

Tested for use fully enclosed and has been designed in 5, 6, 7 and 8 inch sizes to carry up to 60' of height. Intended for use with the Insulated Tee as an interior or exterior support where the chimney has a lateral connection. Also useful where the pipe connection passes through a combustible interior or exterior wall. Braces may only be fastened to the wall above or below the plate for chimneys which penetrate through the wall.

Size: 6"
No. 6T-WSK
Type A chimney
Type HT
Finish: Galvanized
Material: Stainless Steel
Tested for use fully enclosed supports up to 50'
Used with insulated tee as an interior or exterior support where the chimney has a lateral connection
Also where the pipe connection passes through a combustible interior or exterior wall
Consists of base plate, 2 angle iron braces, 2 pads and hardware
Boxed

System Temperature rating: 1400 F Degrees Maximum 60 Minutes
Will allow for an adjustment of 2 inches to 6 inches from a vertical wall
Requires 2 inch airpace to combustibles
System Temperature Rating: 2100 Degrees F Maximum Test 10 Minutes
Underwriters Laboratories UL 103 HT Certified
Industry Best Warrantty Contact Selkirk For Details
Intended for use with the insulated tee as an interior or exterior support where the chimney has a lateral connection
Check Appliance Installation Instructions For Details
System Temperature Rating 1000 F Degrees Maximum Continuous Operating Temperature
Suitable for: Insulated Tee as an Interior or Exterior Support

The Type HT wall support kit has been tested for use fully enclosed and has been designed in 5, 6, 7 and 8 in sizes to carry up to 60 ft of height at 2 in from wall. The capacity of the larger sizes, 10, 12 and 14 in, is 40 ft of chimney. The wall support is intended for use with the Insulated Tee as an interior or exterior support where the chimney has a lateral connection.
Diameter

6"

Material

Stainless Steel

Color

Gray

UL Listed

Yes

Number

6T-WSK

Insulated

YES

Maximum Temperature

2100 °F

Vent Type

Type HT

Packaging Type

Boxed

Indoor or Outdoor

Indoor and Outdoor

Chimney Vent Type

Type A, Type HT

Each Weight

7.100 LB

Maximum Chimney Length

50 ft.

Maximum Continuous Temperature

1800 Btu/h

Adjustable

Yes

Product Type

Wall Support Kit

Height

3.60

Length

18.70

Width

13.50

Country Origin Code

CA

Finish

Galvanized

Specifications

Type Class A Pipe Double Wall Pipe

Type

Type HT

Application

For useful where the pipe connection passes through a combustible interior or exterior wall

Dimensions

6 in Dia x 10-5/8 in W x 18-7/8 in H