Demonfx SIMPLE DI Box Effect Pedal Preamp Simulator Pedal,Power Amp Sim Pedal Stereo Cab Simulator for Electric Guitar

Based on DSM&HUMBOLDT SIMPLIFIER

3 CLASSIC PREAMP

Simplifier features a 100% true analog preamp that recreates with obsessive detail the most useful and popular clean channel preamps in the market

AC BRIT:

Classic AC30 sparkly and tridimensional sound. A true British heritage since the 60's.

AMERICAN: Classic blackface deluxe sound. Sweet and dynamic with a balanced response. By far the most used amp on studio recordings

MS BRIT: Classic clean-to-crunch vintage plexi style amp. The sound that defined rock music.

Gain: Sets the gain of the selected amp model.

Level: Sets the preamp master volume level.

High: Controls the high frequency band.

Mids: Controls the mid band

Lows: Controls the low end frequencies.

GENUINE PASSIVE PREAMP TONE STACK

A key part of a tube amp sound and response is the tone stack behavior. The tone stack on the Simplifier is a genuine configurable three band classic

amplifier topology, keeping the same feel, response and interaction of the original amp.

POWER AMP SIM

This stage is an accurate approximation of the interaction between the power tubes, output transformer and global feedback, which produces a particular frequency response for different tubes and speakers.

PRESENCE:

Controls the hi-mids response just like the feedback based presence control on tube amps. Turn it up to cut through the mix or turn it down to sweeten aggressive distortions.

RESONANCE:

Controls the low-end and resonance peak caused by transformer-speaker interaction in tube amps. Now you can control the dampening factor and get super tight low-end clarity and authority.

POWER TUBES SECTION:

3 way toggle switch that mimic the different response of classic tube types:

EL34: Complex mid response with a compressed feel.

6L6: A more open and dynamic response with deeper bass and sparkling highs.

KT88: Similar to 6L6 but with improved low-end range, perfect for bass or 7+ strings guitars.

STEREO CABSIM

Tweakable Cabinet simulator that takes the heritage and experience of ©DSM Noisemaker developing the most useful and innovative cabsims of the market.

You can easily dial two independent cabinet simulators panned LEFT - RIGHT with MIC POSITION controls that responds as a real CENTER/OFF AXIS microphone position adjusting the precise amount of

high-end roll off you look for.

A three way toggle switch allows you to choose independent cabinet STYLE for each side. 1x12 Combo, 2x12 or big 4x12 cabinet simulations that you can combine with any of the 3 preamp voicings, adding

an extra dimension to your sound development.

SPREAD CONTROL

This unique feature allows you to create a pseudo stereo imaging, by shifting the phase of one channel on selected key frequencies. It will make your sound bigger and 3 dimensional, even if you are using a mono

configuration. This spread is useful to get that "dual Cab" sound with realistic physical separation, very useful for recording on a stereo track, or playing with headphones.

Jack Function:
1.Input : Connect the guitar or other instrument here.
2.Send : The fx send output is after the preamp amp power amp stages, ready to feed your modulation and ambience effects.
3.return Right (mono): Connect the right (mono) output from your stereo effects here.
4. return Left: Connect the left side of your effects here. If this input is unconnected,the left side will take the signal from the FX Return Right (mono) side.
5.OUT R : If selected" FX",Carries the right side output . If selected"SUM MONO", the Right side will sum both outputs.
6. OUT L : If selected "FX",Carries the left side output . If selected "THRU", the input signal (bypass).
7.XLR Right : Carries the Right side output in a balanced signal.
8.XLR Left : Carries the Left ide output in a balanced signal.
9. Aux In : The auxiliary input receives a signal from an mp3 player, phone, or any audio device.
10.Headphone : Connect your headphones here.

Specifications:

Headphone Power: 120mW @ 32 Ohm

Input impedance: 500K ohm

Out impendance:.10K ohm

Weight: 460g

Power Supply: DC IN:9V ~ 15 V, 100 mA