Features& Details
ThisTransmissionFluid Flush Exchange Machine, its flowdirection is automaticallycontrolled, and theflushing oil exchange machine has an equal amountexchange system. The power ofgear- box and the exchanger is easily used to change the oil. Theefficiency is indicated when it works on what you want to removesuch as the grease and metal fillings. You can use it and installit easily. You can't miss it !
How touse:
1. Fill the new oil barrel intothe 12 liters of automate gearbox barrel. Turn the left switchingvalve to "PRESSURE", and the right to"RECYCLE".If external new oil is needed, then link the transparent vitta andthe external new oil "FILLING", and turn the right switchingvalve to "FILLING".
2.Find out the cool off oil vita ATF.
3.Start the engine temporarily and judge the direction of the outletand input oil of both side.
4. Link the cool off oil vittaand the sphere valve, link the red outlet oil valve to the nativemachine "RETURN", while the input oil vitta is linked to the nativemachine's blue plastic oil vitta "PRESSURE".
5.Butt the roof of the car, since every impetus gear needsoperating.
6. Link the compressor and thejoint "AIR".
7.Start the engine, cutting in gear makes the used oil in the autogear box barrel back to the native machine's used oil barrel to 3-4liters.
8. Switch down the sphere valveof red outlet oil vitta, turn on the switching valve of the nativemachine("+" direction means enlarging the volume "-"directionmeans diminishing the volume), first adjust the pressure to 30 PSI,then begin to fill new oil into the gear box, auto-speed-variablebox then begins the exchange of new and used barrel, decide whetherto enlarge or diminish the pressure.
9. The inspection window of themachine "NEW OIL" is which the new oil runsthrough, the inspection window of the outlet oil"USEDOIL"is which the usedoil of the gearbox runs through.
10. Pay attention to the changeof volume and color of the oil in the inspection window of theoutlet oil "USED OIL", then we can adjust the volumeat any time in order to meet the need of the oil volume in thegearbox, until the outlet oil change from foul into the same coloras new oil.
11.While the new oil and used oil is exchanging, every gear isshifted. Stay for 5-10 seconds depending on complexion.
12. Connect the vitta ofgearbox, start the engine, fill in "P" oil catch, supply ATF oildepending on oil level, meanwhile check if there is any oil leaked.When the oil level is enough, check every mile when attempt todrive.(which is absolutelynecessary).
Features& Details
ThisTransmissionFluid Flush Exchange Machine, its flowdirection is automaticallycontrolled, and theflushing oil exchange machine has an equal amountexchange system. The power ofgear- box and the exchanger is easily used to change the oil. Theefficiency is indicated when it works on what you want to removesuch as the grease and metal fillings. You can use it and installit easily. You can't miss it !
How touse:
1. Fill the new oil barrel intothe 12 liters of automate gearbox barrel. Turn the left switchingvalve to "PRESSURE", and the right to"RECYCLE".If external new oil is needed, then link the transparent vitta andthe external new oil "FILLING", and turn the right switchingvalve to "FILLING".
2.Find out the cool off oil vita ATF.
3.Start the engine temporarily and judge the direction of the outletand input oil of both side.
4. Link the cool off oil vittaand the sphere valve, link the red outlet oil valve to the nativemachine "RETURN", while the input oil vitta is linked to the nativemachine's blue plastic oil vitta "PRESSURE".
5.Butt the roof of the car, since every impetus gear needsoperating.
6. Link the compressor and thejoint "AIR".
7.Start the engine, cutting in gear makes the used oil in the autogear box barrel back to the native machine's used oil barrel to 3-4liters.
8. Switch down the sphere valveof red outlet oil vitta, turn on the switching valve of the nativemachine("+" direction means enlarging the volume "-"directionmeans diminishing the volume), first adjust the pressure to 30 PSI,then begin to fill new oil into the gear box, auto-speed-variablebox then begins the exchange of new and used barrel, decide whetherto enlarge or diminish the pressure.
9. The inspection window of themachine "NEW OIL" is which the new oil runsthrough, the inspection window of the outlet oil"USEDOIL"is which the usedoil of the gearbox runs through.
10. Pay attention to the changeof volume and color of the oil in the inspection window of theoutlet oil "USED OIL", then we can adjust the volumeat any time in order to meet the need of the oil volume in thegearbox, until the outlet oil change from foul into the same coloras new oil.
11.While the new oil and used oil is exchanging, every gear isshifted. Stay for 5-10 seconds depending on complexion.
12. Connect the vitta ofgearbox, start the engine, fill in "P" oil catch, supply ATF oildepending on oil level, meanwhile check if there is any oil leaked.When the oil level is enough, check every mile when attempt todrive.(which is absolutelynecessary).