Application

FOR Toyota/Lexus 1UR/3UR 4.6 V8 /5.7 V8 engine.

Compatible for:
2007-2017 For Lexus LS 460 & LS 460 L
2005-2011 For Lexus For GS 460
2008 Present For Lexus LX 570
2010 present For Lexus GX 460
2010 present For Toyota Tundra
2007 Present For Toyota Tundra
2008 Present For Toyota Sequoia
2008 Present For Toyota Land Cruiser 200 Series – US and Middle East markets only
2012 For Toyota Land Cruiser (China, Middle East and Australia)
2009-2013 For Toyota Crown Majesta
2010–2012 For Toyota Sequoia
2009–2013 For Toyota Tundra
2009–2014 For Toyota Sequoia
2014 For Toyota Tundra
--
Pin Type: Floating Pin Piston

Specifications

*Type: Forged 4340 aircraft chrome moly quality steel for racing
*H-beam Conrods Quantity: 8 Pieces as showing in picture
*Bolts: Including ARP 2000 3/8" bolts  (Note: Extra cost for upgrading to ARP L19 bolts)
*The connecting rods all include ARP 2000 bolts, which are rated at 220,000 psi, and the optional ARP L19 material at 260,000 psi is available as an upgraded product.
*Advertised Horsepower Rating:200HP/piece
*Top acceleration: 9000rpm
*package size: 28CM*21CM*14CM

Dimensions

Center to center length:147.5mm/5.807"
Big end diameter:56mm/2.205"
Small end diameter:22mm/0.866"
Big end width:20.8mm/0.819"
Small end width:20.8mm/0.819"

Feature

The density of titanium is significantly lower than that of steel, while maintaining considerable strength, which means that it is lighter than steel, but the strength is very similar.
1. Titanizing can further improve the bending strength of the product;
2. Titanizing will not affect the weight of the connecting rod;
3. Provide a wear-resistant layer, which greatly prolongs the service life of the parts;
4. TÜV PRODUCT TEST AND TÜV ISO 9001 CERTIFIED.
5. Material: Titanizing Forged SAE 4340 Chrome Moly Steel for the highest strength and durability, dedicated for Racing.
6. ARP 2000 bolts ,Optional ARP L19 fasteners available as an upgrade.
7. H-Beam design reduces weight without compromising strength.
8.Heat-treating & Shot-peened for remained consistent and strong, Shot-peened finish to remove potential for stress risers.
9.High precision CNC machined,Precision rod cap alignment dowels.
10.Bores finished to +/- .005mm.
11.Balanced to within +/- 1 g per rod.
12. Each rod is magnetic particle tested to ensure free of flaws.
13.Use X-rayed, sonic tested.
14.Custom Service.

Note

*Professional installation is highly recommended ；
*Custom Service:If there's no conrods you need on our site, we would be happy to help determine your requirements and develop a solution with you to satisfy your needs.