11 Pcs Screw Extractor Set, Easy Out Screw Extractor And Hss Left-Hand, Studs

Product Details

• 𝗖𝗼𝗺𝗽𝗹𝗲𝘁𝗲 𝟭𝟭 𝗣𝗰𝘀 𝗦𝗰𝗿𝗲𝘄 𝗘𝘅𝘁𝗿𝗮𝗰𝘁𝗼𝗿 𝗦𝗲𝘁 - Spiral Screw Extractor Size:1#, 2#, 3#, 4#, 5#. Cobalt Left-Hand Drill Bits Size: 1/8"(3.2mm), 5/32"(4mm), 3/16"(4.8mm), 1/4"(6.5mm), 19/64"(7.5mm). Besides, there is an extra 1/4" quick change adapter to extend the drill interface. A must have tool for carpenters, handymen, contractors, construction workers or DIY enthusiasts alike.
• 𝗗𝘂𝗿𝗮𝗯𝗹𝗲 𝗠𝗮𝘁𝗲𝗿𝗶𝗮𝗹𝘀 & 𝗘𝘅𝗾𝘂𝗶𝘀𝗶𝘁𝗲 𝗖𝗿𝗮𝗳𝘁𝘀𝗺𝗮𝗻𝘀𝗵𝗶𝗽 - The screw extractor is made from high-quality CR-MO steel, and Cobalt Left-Hand Drill Bits made of impact-resistant HSS 4341 steel, which has excellent durability and corrosion resistance compared and service life to other materials. Even the most rusted, worndown, and embedded screws are be removed easily.
• 𝗨𝗹𝘁𝗶𝗺𝗮𝘁𝗲 𝗣𝗿𝗼𝗱𝘂𝗰𝘁 𝗗𝗲𝘀𝗶𝗴𝗻 - Hex Shank quick change adapter, easy insertion via press-in and self-locking mechanism, and fits securely into most power tools. out bolt extractor set is designed with a 135°angle and spiral flutes, which makes it easier and deeper to cut into the workpiece.Uses high-quality long drill bit to adapt to screws of various lengths. At the same time, the use of a longer thread extractor allows the extractor to obtain greater force, and the screw can be efficiently removed in just one go. This is your rare assistant. The specially designed remover set casing keeps all the screw remover stay organized.
• 𝗘𝗮𝘀𝘆 𝘁𝗼 𝗨𝘀𝗲 𝟯 𝗶𝗻𝟭 𝗠𝘂𝗹𝘁𝗶𝗳𝘂𝗻𝗰𝘁𝗶𝗼𝗻𝗮𝗹 𝗦𝗲𝘁 - The upgrade adds an adapter to extend the drill interface. Use the left-hand drill to drill a hole through the broken bolt, insert the correct size screw extractor into the hole and turn counterclockwise with a tap wrench to perfectly remove the damaged part. Simple steps to remove all stuck screws or bolts in a few seconds. Please note use your electric hand drills in low speed.
• 𝗪𝗶𝗱𝗲𝗹𝘆 𝗨𝘀𝗲𝗱 & 𝗣𝗼𝗿𝘁𝗮𝗯𝗹𝗲 - Whether you need to remove rusted, stripped, or damaged bolts and studs, or simply want to disassemble fasteners, this set is an excellent choice. Making it easy to tackle even the toughest tasks. It's built to last and is designed to be harder, tougher, and easier to drill. It weighs only 0.5 lb (240g) and has a package size of 5x3x0.7 inches (125x85x18mm). The screw extractor occupies a small size, but is very powerful and can be easily carried to every corner.
• 📌【NOTE 1】: Drill please use the low-speed gear, the recommended speed between 500-1200 r/min, otherwise the speed is too large easy to produce annealing lead to burnt drill bits, breakage and other problems.
• 📌【NOTE 2】: It is recommended to use a nail or locating pin to determine a drill contact point on the surface of the screw before drilling, so that the drill bit is not easy to slip or to avoid wobbling caused by the drill bit breakage and stabilization of the problem.