Leviton IPS02-1LT Decora Motion Sensor In-Wall Switch, Auto-On, 2.5A, Single Pole, Light Almond

Product Description Leviton IPS02-1LT 300-Watt Incandescent, 150-Watt LED/CFL Occupancy Sensor (Auto ON/Auto OFF), Single Pole, Light Almond. Compatible with Decora screwless snap-on wallplates (sold separately). -- Lower electrical costs and add convenience to everyday living by replacing standard switches with occupancy sensors. Leviton's IPS02 Occupancy Sensor Switch automatically turns the lights ON when you enter a room and OFF when you leave, convenient in rooms where you frequently enter and exit with your hands full. Ideal for use in laundry rooms, basements, storage areas, pantries and garages. Leviton occupancy sensors are a simple, cost effective way to automate a space in your home. Features and Benefits A simple and effective way to save energy and the associated electric costs. Actual savings from sensors vary greatly depending on usage patterns and occupant habits, but used diligently the energy savings and reduced frequency of bulb replacement over time can provide significant cost savings. Time delay settings of 30 seconds, 5 minutes, 15 minutes or 30 minutes for automatic OFF. For example, closet lighting would ideally be set to turn off in 5 minutes while a bathroom fan may be set to turn off 15 minutes after the space is vacated. Contains a built-in override function, so the device can be activated to operate as a vacancy sensor meaning lights must be manually switched ON but will automatically turn OFF when the room is vacated. Does not require a neutral wire for installation making them perfect for retrofit applications where a neutral wire may not be present. A ground wire is required for operation. Perfect for areas where you may have your hands full such as laundry rooms, kitchens, garages, basements, pantries and storage areas rooms. view larger How the Sensor Works It uses "passive infrared technology" which responds to the infrared heat people naturally emit to monitor a specific area. When this "heat" is sensed, the lights will stay ON in the room. When you leave the room and this “heat” is no longer sensed the lights will automatically turn OFF. Leviton occupancy sensors can also detect when there is ample natural light in a space and will not automatically switch lights ON if not needed. Installation and Placement Considerations Leviton Universal Sensors use passive infrared (PIR) technology to detect movement so there are a number of factors that must be considered when installing them: They require a clear view of the room or space for accurate detection—any furniture or obstructions that block the sensor’s view will prevent occupant’s movement from being detected For optimal performance, locate with a clear line-of-view of the area to be covered; perpendicular to the likely movement They are most effective in small, enclosed areas with high levels of occupant motion Size and shape of area needing coverage must be in line with the range of the occupancy sensor The more activity there is in a space, the more sensors will contribute to energy savings and convenience Avoid installing in locations where nearby airflow may falsely register as motion; be mindful of the location of heating units, air conditioners, dryers and other large appliances that generate rapid changes in temperature or movement Increase your energy savings and convenience by turning lights on and off automatically. view larger Leviton IPS02-1LW 300-Watt Incandescent, 150-Watt LED/CFL Occupancy Sensor (Auto ON/Auto OFF), Single Pole, White At a Glance: Automatic ON/Automatic OFF Great for laundry rooms, bathrooms, utility rooms, workshops and garages Ambient light sensitivity prevents automatic ON when space has enough natural light Fits in standard wallbox and replaces single-pole wall switch Four timing options for automatic shutoff, from 30 seconds to 30 minutes