These fine Nylon gears have improved design for better durability and performance
compare to OEM and superior to other plastics replacements
US made out of Nylon - tough and flexible plastic
Nylon naturally slippery, no lubrication required!
Runs quieter and smoother
Only Nylons should be used for gears where a slippery surface is desired.
All other materials (PLA, ABS, PET, etc.) will grind creating a plastic dust and eventually fail!
For details, please review all pictures
32 tooth gear OD: 1.413" (35.9mm)
DP 24
Overall width 3/4" (0.75) (19mm)
Gear face width: 3/8 (0.375) (11.5mm)
Hub Width 3/8 (0.375) with 1/8" radial hole
Center bore: 9/16 (0.56)
Please note: The set screw
won’t hold this gear.
We
recommend:
a. Drill a 1/8 radial hole through the spindle
b. Insert 1/8 screw through the both sides of
the gear hub and
spindle hole
c. Secure screw with the lock nut.
Do not waste your money on ABS or PLA plastic gear that may strip or even melt!
Introductory price - please share installed images and review.