DL1SP13 Chrome Dually Valve Kit-2013-Present Sprinter Class B or C, Wheel Size 16” Steel, Size 1.5” Round

Reduce;

Tire Pressure

Brake Wear

Fuel Use

Accidents

Works with TPMS AND Balancing Components

Bolt-In Valve Stems Made For Your Class A,B & C Motorhomes

NO LEAKS GUARANTEED

DUAL OUTER WHEEL ACCESS

Only Takes 2 Hands To Check and Maintain Air Pressure

FOR:2013-Present Sprinter Class B or C,

Wheel Size: 16” Steel

Size: 1.5” Round

Model: DL1SP13

BRAND: Valve Stems

Condition is Brand New

Shipped with USPS First Class Package.

You Will Receive 1 ea DL1SP13 Chrome Dually Valve Kit-2013-Present Sprinter Class B or C,16”Wheel Size Steel, Size 1.5” Round

RARE VINTAGE COLLECTIBLE

SHIPS N 24 HOURS

Packed By Our Award Winning Packaging And Shipping Department

LIMITED AVAILABILITY

Inventory Box #686 & 982, 976 @ warehouse

DL1SP13 Dually Valve Kit Chrome Fits Sprinter 2013- Present 16" Steel Wheel 1.5" Round Holes Class B or C. Condition is New. Shipped USPS Priority Mail.

Description:

Wheel Size: 16in.

Inner / Outer Wheel Types:Steel / Steel

Stabilizer Shape: Round

Hand Hole Size: 1-1/2in.

MAKE & MODEL: Sprinter

Kit Includes:

(2) INNER DUAL WHEEL CHROME VALVESTEMS

(2) OUTER DUAL WHEEL CHROME VALVESTEMS

(2) STABILIZERS (Go in the outer Wheel that stabilize theinner dual wheel stem. Does not go in the cover / simulator cover)

(1) PACKET OF LOCTITE (For Reverse Mount Stems)

The Duallyvalve kit makes iteasier for Motorhome or Commercial Vehicles to check and maintain tire pressureon six-wheeled chassis. Traditionally adding air to dually tires was difficultand required the use of specially designed air chucks and specially designedair gauges just to get to the valve stem. Not anymore! The length of the innerdual valve has been extended to reach the outer dual thus making it easy to addair.

TPMS: All four valve stems in the Dually valve kit can accommodate TPMS Sensor Caps, that go on the end of the valve stem.

Note: To reduce potentialfuture air leaks; we recommend after 5 years replacing the rubber seals on thevalve stems in the Dually Valve Kit.

Replacement Grommets neededfor your kit are...

(1 per valve stem)

Inner Dual Stems Grommet Part #: VHRG80B Sprinter Grommet .453

Outer Dual Stems Grommet Part #: VHRG80B Sprinter Grommet .453

Front Stems Grommet Part #: VHRG80B Sprinter Grommet .453

If you would like to replace your stabilizers also the part # is...

(1 per outer wheel)

Stabilizers Part #: VHRG15 Round 1.5"

We also reccomend to wire tie or zip tie the wheel covers to the wheel in this application. They tend torotate and fly off.

**Please Note**

Inner Stems will have to be bent in order to be centered in the outer hand-hole

Step 1

· Stack the Duals

· Check if the inner stem is centeredin the hand-hole

Step 2

· Bend the valve stem slightly,so the stem is centered in the hand-hole. (When bending support, support thebase and keep the valve cap on to protects the threads).

Step 3

· Re-stack the duals to confirmthat the valve stems are centered.