110/220V 75Amps Pilot Arc [Air Sensor Technology] Dual Voltage STC750P Inverter Air Plasma Cutter Machine with Large Digital Screen Display, 50/60Hz Plasma Cutting Machine.
![110/220V 75Amps Pilot Arc [Air Sensor Technology] Dual Voltage STC750P Inverter Air Plasma Cutter Machine with Large Digital Screen Display, 50/60Hz Plasma Cutting Machine.](https://autods-scraper-images.s3-us-west-2.amazonaws.com/64b065b326cc320a38ff7cb29f2d1dca.png)
Specification
| Item model number | STC750P |
| Part Number | STC750P |
| Batteries Required? | No |
| Power Source | ac |
| Item Package Quantity | 1 |
| Color | Orange |
| Material | plasma cutter, plasma cutting torch, metal, electronic, plasma cutter |
| Country of Origin | China |
| Item Weight | 26.8 pounds |
| Voltage | 110220 Volts |
| Manufacturer | SILATU |
| Package Dimensions | 20.75 x 15 x 12.5 inches |
| Included Components | plasma cutter, plasma cutting machine, earth clamp with cable, fixed air regulator |
15.0 inches x 20.75 inches x 12.5 inches. Weight: 26.8 lb
Item Description
- Pilot Arc Plasma Cutter: The STC750P plasma cutter with pilot arc function, It’s a high-frequency non-contact arc starting method, This means the torch head doesn't need to make contact with the metal plate. With the addition of a PA (Pilot Arc) adjustable function, the maintenance time of the pilot arc is extended, reducing energy consumption during non-cutting periods and minimizing electrode wear, extend consumables life.
- Digital Screen Display: The central digital display shows parameters like air pressure, voltage, and current, enabling users to monitor the equipment's status in real-time and make adjustments as needed, enhancing operational efficiency. In the event of a malfunction, the screen displays an error code, facilitating quick troubleshooting.
- Air Sensor Technology: The air sensor built in machine displays the air pressure on the front panel of the machine. Users can adjust the air pressure manually through the air regulator (air pressure cannot be automatically adjusted). An air filter is installed at the back of the machine, equipped with a quick-connect 1/4 NPT air connector, ready for use right out of the box. Once connected to an air compressor, the recommended air pressure should be within 65 PSI, with a flow rate of 250 liters per minute
- Plasma Cutting Thickness: With advanced IGBT inverter technology, the 50/60 Hz high-frequency pilot arc plasma cutter supports dual voltage inputs of 110V and 220V, and operates at a 60% duty cycle. At 110V, the current range is 15-40A. while at 220V, it ranges from 15-75A. The recommended maximum cutting thickness is 12mm at 40A and 45 PSI on 110V, And 25mm at 75A and 70 PSI on 220V.
- PT/2T/4T/PA Function: The post-time function can be adjusted between 3-15 seconds, helping to cool the torch head and extend the life of consumables. A cooling time of 4-8 seconds is generally recommended. The 2T and 4T modes offer automated cutting control, relieving the user's hand. 2T is a semi-automatic cutting control, whereas 4T is fully automatic. The PA setting adjusts the duration of the pilot arc, with longer settings ideal for cutting mesh metal and shorter settings beneficial for extending the life of consumables.
Product Description
Return Policy
• We guarantee against any defective or misrepresented products. The original shipping label must be sent back to us to validate the return. A full refund can only be issued during the first 30 days upon receipt of the product.
• Returns will be voided if the product is mishandled or physical damaged by customer.
• Buyer will be responsible for all kind of return shipping/shipment to the seller for resolving the problem.
• Returns made for all non-defective, undamaged products are subject to a 15% restocking fee. Shipping and handling fees are absolutely non-refundable. If an item is returned to us due to an address issue, we do charge a reshipping fee to reship. If you would like a refund, there will be a 15% restocking fee applied.
• All returned products need to be assigned an RMA # (Return Merchandise Authorization #) prior to return. Please contact us through's messaging system to obtain an RMA# for the return. Any returned product without an RMA # on package will not be accepted or processed.
• Please contact us before returning.
Feedback
• We appreciate your feedback and our system will automatically leave feedback for you after bid ends.
• Please contact us through message center if you have any problems, we will always try our best for 100% customer satisfaction.