014 Viton O-Ring, 75A Durometer, Round, Brown, 1/2" Id, 5/8" Od,, Pack Of 100

This O-ring is made of brown Viton and has a durometer of 75A. It has a round cross-section and can be used across a wide temperature range (-15 degrees F/-26 degrees C to 400 degrees F/205 degrees C). Designed for use in a wide variety of sealing applications, this Viton O-ring meet standards defined by Aerospace Standard AS568A, which is the Aerospace Size Standard for O-rings. Viton (fluorocarbon elastomer) has high heat, fuel, and chemical resistance, and is compatible for use with non-flammable hydraulic fuels, silicone oil, chlorinated hydrocarbons (trichlorethylene), fuels, aromatic hydrocarbons (benzene) and aliphatic hydrocarbons (propane), as well as high vacuum environments, ozone, and weathering. Viton is vulnerable to low molecular organic acids, ammonia gas, alkalis, amines, glycol-based brake fluids, and super-heated steam. The durometer hardness of this Viton O-ring is 75A. Durometers measure the hardness of a material and its resistance to permanent indentation. A higher durometer value indicates greater resistance to indentation. On a scale of 0 to 100, a value of 0 indicates that a sample was completely penetrated, while a value of 100 shows no indentation in the sample. The letter following the number identifies the shore scale, which is either shore A or D. Shore A is used for softer plastics, while shore D is used for harder plastics. O-rings provide a pressure and fluid seal between cylindrically shaped, overlapping mating surfaces and are commonly seen in engines, faucets, flanges, valves, and various cylinders. They are circular in shape, with a round cross section, and a hole in the center, similar to a doughnut. O-rings are available in various AS568A dash sizes, which is the standardized sizing for O-rings, and defines the nominal inside diameter (ID), outer diameter (OD), and cross-sectional (CS) diameter of an O-ring.

Product Features

  • Made of Viton (fluorocarbon elastomer) for use with a variety of chemicals and fuels
  • Durometer (hardness) of 75A for resistance to penetration
  • Round cross-section to provide a seal between cylindrical overlapping surfaces
  • For use across a wide temperature range from -15 degrees F/-26 degrees C to 400 degrees F/205 degrees C
  • Meets standards defined by Aerospace Standard AS568A



Shipping:

Shipping is complimentary within the lower 48 US States.

  • We Do Not Ship to PO/APO Boxes, HI or Alaska
  • We Do Not Ship Outside of the Continental US
  • All items ship within 24-72 hours of Payment
  • For large items that require Freight shipping a valid phone number is required to call and schedule your delivery

Terms of Sale and Feedback:

  • Feedback is extremely important to us and
  • If you are satisfied with our transaction, please take a moment to leave Positive Feedback. YOUR Satisfaction is our #1 Priority!
  • If there are any issues, PLEASE contact us BEFORE leaving a neutral or negative rating so that we may resolve any concerns.
  • We PROMISE we can make you happy if you give us a fair chance.

Returns / Concerns:

  • All items qualify for returns within 14 - 30 days of receipt. Buyer is responsible for return shipping on any item that is not damaged
  • Please be sure this is an item you want before making your purchase. Customer Satisfaction is our TOP priority!
  • All items are IN STOCK at time of listing.
  • Inventory changes constantly and it is impossible to maintain a perfectly accurate count of all items.
  • Please do not penalize us if we have to issue you a refund!


Thank You For Your Business!