X472000070 FITS ECHO TRIMMER HEAD COVER LID FOR SHINDAIWA SPEED FEED 400 (3)

This is for three (quantity 3) brand new replacement Echo and Shindaiwa USA made trimmer head covers (also referred to as a lid or case) part number X472000070. This fits some current and newer model ECHO SRM225, GT230 and Shindaiwa T230, T242, T242x that use the new speed feed 400 trimmer head which have small round eyelets where the line goes through. This cap will not work on the speed feed 375 trimmer head which was used on the older models that looks similar but uses large horse shoe shaped eyelets where the line goes through. The diameter of this cover is about 3 7/8" and is slightly egg shaped as can be seen in the pictures. This cover is most distinguishable by the two pins that meet the eyelets shown in the last picture as the other two covers mentioned do not have these. THERE ARE THREE VERSIONS OF THIS BUMP HEAD AVAILABLE. THIS IS THE COVER FOR THE SMALLER VERSION (NEWER SPEED FEED 400) THAT MEASURES ABOUT 3 7/8" IN DIAMETER, HAS SMALL ROUND EYELETS AND TWO PINS WHERE THE COVER MEETS THE EYELETS. PLEASE E-MAIL US IF YOU ARE UNSURE IF THIS COVER WILL FIT. IF YOU NEED THE COVER FOR THE OLDER SPEED FEED 375 HEAD ALSO ABOUT 3 7/8" IN DIAMETER AND USES LARGE RECTANGULAR EYELETS PLEASE Please reference the different features below to determine if this the correct cover neededSpeed Feed 400 features just under 4" in diameterUses perfectly round eyelets Has two pins either side that meets eyelets Speed Feed 375 Features -Just under 4" in diameterUses Large Horseshoe shaped eyelets Has one notch either side that meets eyeletsSpeed Feed 450 features 4/1/2" in Diameter (Only one this size) Add Interstate Supplies and Services to your favorite stores, Click here! PaymentYou may pay using: Paypal-Paypal will accept payment from a credit card, just select "Pay with a debit or credit card, or Bill me Later" on the paypal screen.   Shipments:We offer free shipping on most items, we reserve the right to use either USPS,FEDEX, or FEDEX smartpost for your items. Depending on your location and the items weight, we may use the most economic shipping service. You are welcome to give us a call and pay for expedited shipping if you need your item ASAP.You will be notified by email when your item has been shipped. We will supply tracking information directly to your account once the shipping label is created.    Returns:If you ordered the wrong part, Provenpart will return or exchange the item. You will be responsible for the return shipping. Once we receive your item, we will be happy to exchange it for the correct part. If the item is found to be defective the customer may send the part back for inspection from Provenpart, if the part is considered to have a material defect Provenpart will send the customer at no charge a replacement part. All parts and equipment purchased are purchased by the buyer with no additional promises being made for technical service. Item's that have not been used or installed may under authorized conditions, be returned within 14 days for a partial refund less the shipping cost and a 20% restocking fee. The original shipping cost covering the items shipped to the buyer is not refundable for any reason as this was agreed to in the initial sale of the product and is not part of the actual value of the item in question.By purchasing any parts or equipment from Provenpart you agree to these terms and conditions.


This is for three (quantity 3) brand new replacement Echo and Shindaiwa USA made trimmer head covers (also referred to as a lid or case) part number X472000070. This fits some current and newer model ECHO SRM225, GT230 and Shindaiwa T230, T242, T242x that use the new speed feed 400 trimmer head which have small round eyelets where the line goes through. This cap will not work on the speed feed 375 trimmer head which was used on the older models that looks similar but uses large horse shoe shaped eyelets where the line goes through. The diameter of this cover is about 3 7/8" and is slightly egg shaped as can be seen in the pictures. This cover is most distinguishable by the two pins that meet the eyelets shown in the last picture as the other two covers mentioned do not have these. 


THERE ARE THREE VERSIONS OF THIS BUMP HEAD AVAILABLE. 

THIS IS THE COVER FOR THE SMALLER VERSION (NEWER SPEED FEED 400) THAT MEASURES ABOUT 3 7/8" IN DIAMETER, HAS SMALL ROUND EYELETS AND TWO PINS WHERE THE COVER MEETS THE EYELETS. PLEASE E-MAIL US IF YOU ARE UNSURE 

IF THIS COVER WILL FIT. IF YOU NEED THE COVER FOR THE OLDER SPEED FEED 375 HEAD ALSO ABOUT 3 7/8" IN DIAMETER AND USES LARGE RECTANGULAR EYELETS PLEASE 

Please reference the different features below to determine if this the correct cover needed

Speed Feed 400 features 

just under 4" in diameter

Uses perfectly round eyelets 

Has two pins either side that meets eyelets 

Speed Feed 375 Features -

Just under 4" in diameter

Uses Large Horseshoe shaped eyelets 

Has one notch either side that meets eyelets



Speed Feed 450 features 

4/1/2" in Diameter (Only one this size)

Add Interstate Supplies and Services to your favorite stores,

Interstate supplies and Services

Payment
You may pay using:
Paypal-Paypal will accept payment from a credit card, just select "Pay with a debit or credit card, or Bill me Later" on the paypal screen.

 

Shipments:
We offer free shipping on most items, we reserve the right to use either USPS,FEDEX, or FEDEX smartpost for your items. Depending on your location and the items weight, we may use the most economic shipping service. You are welcome to give us a call and pay for expedited shipping if you need your item ASAP.You will be notified by email when your item has been shipped. We will supply tracking information directly to your account once the shipping label is created.

 

 

Returns:
If you ordered the wrong part, Provenpart will return or exchange the item. You will be responsible for the return shipping. Once we receive your item, we will be happy to exchange it for the correct part.
If the item is found to be defective the customer may send the part back for inspection from Provenpart, if the part is considered to have a material defect Provenpart will send the customer at no charge a replacement part. All parts and equipment purchased are purchased by the buyer with no additional promises being made for technical service. Item's that have not been used or installed may under authorized conditions, be returned within 14 days for a partial refund less the shipping cost and a 20% restocking fee. The original shipping cost covering the items shipped to the buyer is not refundable for any reason as this was agreed to in the initial sale of the product and is not part of the actual value of the item in question.By purchasing any parts or equipment from Provenpart you agree to these terms and conditions.
integration by