5 A 250 V AC resistive 1 relay outputs || 5 A 30 V DC resistive 1 relay outputs || 2 A 250 V AC inductive 0.4 20 ms relay outputs || 2 A 30 V DC inductive 7 ms relay outputs
Communication Port Protocol:
Modbus
Ptc Probe Input:
750 Ohm
Pollution Degree:
level 2 IEC 60664-1
Control Circuit Consumption:
20 W
Device Connection:
in the motor supply line
Width:
150 mm
Shock Resistance:
15 gn 11 ms IEC 60068-2-27
Discrete Output Type:
relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O || relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O
Function Available:
internal bypass
Phase:
3 phase
Minimum Switching Current:
100 mA 12 V DC relay outputs)
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Range Of Product:
Altistart 22
Height:
356 mm
Product Or Component Type:
soft starter
Product Destination:
asynchronous motors
[Us] Rated Supply Voltage:
208...600 V - 15...10 %
China Rohs Regulation:
X
Physical Interface:
RS485 multidrop
Marking:
CE
Type Of Cooling:
forced convection
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Noise Level:
56 dB
Operating Altitude:
<= 3280.84 ft (1000 m) without derating || > 3280.84...< 6561.68 ft (> 1000...< 2000 m) with current derating of 2.2 % per additional 100 m
Installed Device:
31
Supply Voltage Limits:
177-660 V
Type Of Start:
start with torque control (current limited to 3.5 In)
Ip Degree Of Protection:
IP20
Depth:
229.5 mm
Utilisation Category:
AC-53A
Protection Type:
phase failure line || thermal protection motor || thermal protection starter
Network Frequency:
45...66 Hz
Ambient Air Temperature For Operation:
-10-40 °C without derating) || 40-60 °C with current derating 2.2 % per °C)
Discrete Output Number:
2
Electromagnetic Compatibility:
conducted and radiated emissions level A IEC 60947-4-2 || damped oscillating waves level 3 IEC 61000-4-12 || electrostatic discharge level 3 IEC 61000-4-2 || immunity to electrical transients level 4 IEC 61000-4-4 || immunity to radiated radio-electr
Discrete Input Type:
LI1, LI2, LI3) logic, 5 mA 20 kOhm
Discrete Input Logic:
positive logic LI1, LI2, LI3 < 20 V <= 15 mA > 79 V, <= 2 mA
Communication Data Link:
serial
Product Certifications:
CSA || UL || C-tick || GOST || CCC
Relative Humidity:
0-95 % without condensation or dripping water IEC 60068-2-3
Vibration Resistance:
1 gn 13-200 Hz)IEC 60068-2-6 || 1.5 mm 2-13 Hz)IEC 60068-2-6
Ambient Air Temperature For Storage:
-25-70 °C
Assembly Style:
with heat sink
Transmission Rate:
4800, 9600 or 19200 bps
Standards:
IEC 60947-4-2
Output Current:
0.4...1 Icl adjustable
Mercury Free:
Yes
Connector Type:
1 RJ45
Icl Starter Rating:
110 A connection in the motor supply line for standard applications
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Operating Position:
vertical +/- 10 degree
Factory Setting Current:
96 A
Power Dissipation In W:
73 W for standard applications
[Uc] Control Circuit Voltage:
110 V - 15...10 % 50/60 Hz
Warranty:
18 months
Supply Frequency:
50...60 Hz - 10...10 %
Net Weight:
18 kg
Component Name:
ATS22
Product Specific Application:
pumps and fans
Maximum Horse Power Rating:
100 hp 575 V || 30 hp 208 V || 40 hp 230 V || 75 hp 460 V
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.