Pilot Arc Plasma Cutter Torch, Plasma Cutting Gun Suitable for 40A 50A 60A High Frequency Air Plasma Cutting Machine.Fit CUT50DP CUT40DP CUT60DP AG60P
Specification
| Item Weight | 3.82 pounds |
| Part Number | Cuwiny AG60 torch |
| Item model number | Cuwiny AG60 torch |
| Package Dimensions | 14.37 x 12.48 x 2.91 inches |
| Manufacturer | Cuwiny |
12.48 inches x 14.37 inches x 2.91 inches. Weight: 3.82 lb
Item Description
- High quality Pilot Arc Plasma Cutter torch with 4m (13ft) cable, outermost canvas wrapped.
- Suitable for most Pilot Arc Plasma Cutting Machine,The torch with M16*1.5 screw air Interface,2 Pins connector,Leading arcs.
- The package contains a set of consumables ( 1 Nozzles, 1 Electrodes, 1 Guide, 1 Cup) already installed on the cutting gun, cutting gun, cable, installation tool, interface protection sleeve.c
- The cable uses 6 square copper wire, rated working current 60A, 60% Duty Cycle, can be used for a long time in the cutter below 60A, including 40A, 50A, 60A cutter. The maximum support in 80A short time work.
- We offer high quality AG60 Cutter torch, if you have any questions about this product, please feel free to contact us.
Product description:
Current: 60A
Duty Cycle: 60%
Gas: AIR
Gas Pressure:4.5-5.0 Bar
Gas Flow:160LPM
Ignition:HF
Post Flow:40 sec.recommended
Standard Length:4m (13ft)
Current: 60A
Duty Cycle: 60%
Gas: AIR
Gas Pressure:4.5-5.0 Bar
Gas Flow:160LPM
Ignition:HF
Post Flow:40 sec.recommended
Standard Length:4m (13ft)
Return Policy
• We guarantee against any defective or misrepresented products. The original shipping label must be sent back to us to validate the return. A full refund can only be issued during the first 30 days upon receipt of the product.
• Returns will be voided if the product is mishandled or physical damaged by customer.
• Buyer will be responsible for all kind of return shipping/shipment to the seller for resolving the problem.
• Returns made for all non-defective, undamaged products are subject to a 15% restocking fee. Shipping and handling fees are absolutely non-refundable. If an item is returned to us due to an address issue, we do charge a reshipping fee to reship. If you would like a refund, there will be a 15% restocking fee applied.
• All returned products need to be assigned an RMA # (Return Merchandise Authorization #) prior to return. Please contact us through's messaging system to obtain an RMA# for the return. Any returned product without an RMA # on package will not be accepted or processed.
• Please contact us before returning.
Feedback
• We appreciate your feedback and our system will automatically leave feedback for you after bid ends.
• Please contact us through message center if you have any problems, we will always try our best for 100% customer satisfaction.