TWO 9 1/8" MAX PRO FEEDERS - 3" WIDE
 2 GALLONS - WITH CAP/LADDER

You will receive the following per feeder:
1 Feeder Body
1 Cap (wood piece with two holes)
2 Ladders (mesh plastic tubes)
3 Cap Bands (black bands)

See images for installation instructions.

Note: There is an upgrade to the wood block that is not shown in the illustrations. There is a notch on each end of the wood block to make it fit better inside the feeder body. The notch should be DOWN and at the bottom of the wood board before inserting the mesh tubes. The wood block should be flush with the ears of the feeder body if installed properly.