Step 2, Orange - BUFFING:

Carefully secure the Orange pad to the foam gripper and apply a 1-2 inch strip of Orange compound #2 to Orange buffing pad #2. Hold the gripper firmly, and buff vigorously in the direction of the grain until the surface appears polished. Clean the area thoroughly of all residue before proceeding to step #3. Failure to completely clean all of the diamond compound #2 may cause scratching during the final step. Remove the orange buffing pad from the gripper and cover the used side with a plastic pad protector before storing.

Step 3, Black - POLISHING:

Carefully secure the Black pad to the foam gripper and apply a 1-2 inch strip of Black compound #3 to Black buffing pad #3. Buff with the polishing compound until the surface is sufficiently blended and polished. Finish by cleaning the area thoroughly of all residue. Remove the black buffing pad from the gripper and cover the used side with a plastic pad protector before storing.

Important Product Information:

• ALWAYS clean the scratched area completely between steps, removing all traces of the previous compound before proceeding.
• ALWAYS apply the compounds in order as marked on the syringes, and ALWAYS use the same buffing compound with its designated buffing pad, as these should NEVER be mixed or swapped.
• When not in use, the buffing pads should always be covered by the included pad protectors. Once a buffing pad has been coated with buffing compound, it is highly susceptible to contamination by foreign particles, as these may stick to the pad’s surface and cause scratching. Never use a buffing pad that has been dropped on the floor, come into contact with the wrong buffing compound, or contaminated by any foreign matter or particles.
• Store Scratch Pro compounds between 41° and 100° F. It is also important to avoid direct sunlight, as this may cause melting. ALWAYS replace the syringe caps after use to prevent leakage

Caution: Possible skin and eye irritant. The manufacturer’s liability is limited to the replacement of product or refund of purchase value upon return of unused portion of the product. Except where required by law, Superabrasive will not be liable for any loss or damage caused by the product. All statements made by Superabrasive pertaining to Scratch Pro including, but nonlimited to usage instructions, etc. are based upon tests conducted by Superabrasive and the results achieved thereafter. The user should understand that there are many factors beyond Superabrasive’s control that can affect product performance. Therefore, it is the responsibility of the user to determine whether Scratch Pro is appropriate for the user’s individual needs.