Aluminum Swivel Neck Thermostat Housing KSwap KSeries Honda Accord + DHL EXPRESS
Features :
- The housing swivels, allowing you to position the water outlet angle before it is tightened down.
- The provided custom made fitting is the same size as the 3rd Party rad hose on one end, and is threaded for an AN fitting on the other end.
- This allows you to use whatever size fitting you need for custom installations. If you want to use braided hose with AN fittings, this housing will bolt on easily and with the right adapter threaded in, you’ll be all set.
- The swivel neck comes pre-assembled with a quality thermostat (180 deg °F) which is held in place with a C-clip which is known to withstand high pressures.
- Adjustable, set the rad hose at any angle.
- Fan switch port for engine swaps.
- Easily deletes heater core hoses on race cars.
- Threaded water outlet for custom setups.
- The kit uses a standard size thermostat that you can easily replace with anything in the (160-195 °F) degree range.
- The housing has three ports in the body, one for your fan switch, a 1/8 NPT port for gauges etc. and also NPT port for our optional recirculation fitting. 2 NPT plugs are included in case the ports remain unused.
- Made of high quality CNC machined aluminum
Notes :
- Not Including Installation Guide or Manual
- Professional Installation is Recommended
- Vehicle compatibility charts are for REFERENCE ONLY. Check your vehicle to match your needs.
Applications ( Fits For Below Vehicles ) :
- For K Series K20 K20A K20A2 K20Z1 K24A K24Z (Like RSX, TSX, Accord, Civic, CR-V)
*** Please make sure it fits your cars before purchase ***
*** Most of the images provided are for illustration purposes only and may not be the actual products.
Package Content :
- 1 x Swivel Thermostat Housing
- 1 x -16AN Hose Adapter
- 3 x Bolts
Packing Size : 13 x 12 x 9 cm
Packing Weight : 0.5 kg
Actual Weight : 0.5 kg