The Harrower-class dreadnought, known more infrequently as the Harrower-class battle cruiser, was a heavily-armed class of wedge-shaped capital ship that was the backbone of the Imperial Navy of the reconstituted Sith Empire for over eight and a half decades; seeing action throughout the Great Galactic War, the Cold War, the Galactic War and the Third Galactic War with the Galactic Republic as well as the war against the Eternal Empire.

Produced by Taerab Starship Manufacturing and measuring around eight hundred meters long with heavily-reinforced hull plating and shield generators, the Harrower-class dreadnought carried a complement of over one hundred starfighters, bombers, and shuttles; a single dreadnought required a crew of 2,400 and could carry 7,300 troops. Harrower-class dreadnoughts required an immense amount of energy and materials to produce, and a single dreadnought was capable of taking on starfighters and smaller warships on its own when it was not coordinating Imperial fleets as a command ship.

A large dreadnaught that was approximately 800 meters in length, 433 meters in width, and 151 meters in height the Harrower-class dreadnought, also known as the Harrower-class battle cruiser, adhered to the wedge-shaped design that had been used for warships of the Sith Empire since the Empire's founding in 4980 BBY. The "point" of the Harrower-class's wedge was split down the middle for a quarter to a third of the length of the ship, forming two prongs.

Between those two prongs was one of the Harrower-class's hangar bays, with two hangar openings stacked on top of each other and protected by force fields. Two additional hangars were located on either side of the ship, between the ends of the forward prongs and two smaller "wings" that protruded from each side closer to the rear of the ship. Two of the ship's shield generators were located on the upper hull of each of those wings, and a final hangar was located on the underbelly of the dreadnought.

All parts are quality checked before shipping, so if you find any parts missing or damaged, don't worry. Please contact us and we will send them to you immediately free of charge.

Important information

1.  Stickers, minifi-gures, printed parts & third-party accessories are not included.

2.  We only provide the PDF instruction manual, Contact us for instructions please.

3. Please pay close attention to the first three pages of the PDF Instructions as we have replaced some parts or simply removed rare parts.

4.  Without Original Box, New in Sealed Bag. When the weight is more than 2 KG, neutral cartons will be used.

5.  It is not already built, You need to build it yourself according to the PDF instructions.

6. They are not Lego Pieces, But these pieces are 100% compatible.

Warranty & Support

1. Manufacturer’s warranty can be requested from customer service. Click Contact seller to make a request to customer service.

2. If you find that some parts are missing, please do not hesitate to contact us, we will arrange replacements for you in time.