Brand APC
Battery Cell Composition Lead Acid
Product Dimensions 23"D x 17"W x 3.4"H
Voltage 120 Volts
Amperage 15
Intelligent Battery Management
Temperature-compensated charging extends life and advanced algorithms recommend replacement date. The UPS can inform users which batteries need to be replaced in advance and auto detect when additional battery packs are added.
Graphical LCD
Multi-color and multi-language backlit LCD changes color when an issue is present, allowing for users to easily identify the UPS status. Information available on the LCD includes load indicator, battery charge, output/input voltage, runtime, load, and battery health. Includes local configuration capability.
Green/ECO Mode
Energy-efficient operating mode that bypasses unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection. Designed to achieve 97% efficiency, which saves utility and cooling costs without compromising performance or reliability. ENERGY STAR compliant.
Operate without Battery
Ability to immediately protect equipment when power returns after a complete discharge of the battery.
Built-In Energy Meter
Measures energy use and displays UPS efficiency in various modes of operation for easy energy tracking.
Rack/Tower Convertible
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
SmartSlot Interface
Lets you add a network management card to customize UPS capabilities as well as manage and monitor the UPS remotely. This particular model comes with a pre-installed AP9641 network management card.
Battery Failure Notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance.
Automatic Self-Test
Periodic battery self-test helps to ensures early detection of a battery that needs to be replaced.
Predictive Failure Notification
Provides early-warning fault analysis that helps to ensure proactive component replacement.
Disconnected Battery Notification
Warns when a battery is not available to provide backup power.
Audible Alarms
Provides notification of changing utility power and UPS power conditions.
User-Replaceable Batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries, reducing Mean Time to Repair (MTTR).
Serial Connectivity
Provides management of the UPS via a serial port.
Network Manageable
Provides remote power management of the UPS over the network.
InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.
Plug-and-Play External Batteries
Helps to ensure clean, uninterrupted power to the loads when adding extra runtime to the UPS.
Flash Upgradeable Firmware
Allows for remote installation of maintenance releases via FTP.
PowerChute Software
Allows for monitoring and control, safe operating system shutdown, and energy management capabilities.
Power Conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.
Input Power Factor Correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
Resettable Circuit Breaker
Easy recovery from overloads; no need to replace a fuse.
Safety-Agency Approved
Product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Generator Compatible
Helps to ensure clean, uninterrupted power to protected equipment when generator power is used.
Cold-Start Capable
Provides temporary battery power when the utility power is out.
Frequency and Voltage Regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Hot-Swappable Batteries
Helps to ensure clean, uninterrupted power to protected equipment while batteries are being replaced.
Automatic Internal Bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Scalable Runtime
Allows additional run time to be quickly added as needed.
Automatic Restart of Loads after UPS Shutdown
Automatically starts up the connected equipment upon the return of utility power.
Temperature-Compensated Battery Charging
Designed to prolong battery life by regulating the charge voltage according to battery temperature.

Keep your servers up and running during a power outage with the Smart-UPS SRT 2200VA Rack Mount with Network Management Card. With a maximum power output of up to 1800W / 2200 VA, six NEMA 5-20R outputs, and a NEMA L5-20R output, the Smart-UPS SRT 2200VA RM 120V offers ideal power protection for such applications as mid-range Windows/Linux servers, Wi-Fi applications, data network backbones, medical labs, ATM machines, cellular sites, and other business-critical systems. The rack/tower convertible Smart-UPS SRT 2200VA RM 120V comes with a multi-color backlit LCD status display that shows current load, battery charge, output/input voltage, runtime, and battery health. Also included are Ethernet, serial, USB and SmartSlot interfaces, audible alarms, hot-swappable batteries, an estimated three-hour recharge time, and cold-start functionality. This particular model comes with a pre-installed AP9641 network management card.