A heavy cast iron sconce light that was once used to indicate whether an elevator was going up or down. When the top globe was lit the elevator was going up, and so on. This is a quality light, finely cast and weighing 5 pounds 10 ounces without the globes.
This light from the early 1900s has been fully restored. It was stripped to bare metal, primed with an anti-rust primer, then given multiple coats of dead-black. The sockets are two-piece porcelain with hex bases; very hard to find these. Three thumbscrews are original, three are replacements. All turn freely as the holes were retapped.
Fitter size is 3.25", standard for this type of sconce.
The opal milk-glass globes are 6-inch diameter. This sconce is also available with art glass flame globes $650 and with frosted flame glass globes also for $425. These versions are listed separately.
Specs
17" high with globes
9" extension from wall with globes
3.5" backplate
Weighs 7 lbs 3 ounces with globes
Antique and vintage lighting should be inspected and installed by a licensed electrician.
Please see our other listings for a large selection of antique and vintage lighting.